Samsung Captivate Glide Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          25 minutes            

Sections

2

• Motherboard
• 8 steps
• Speaker
• 2 steps

Flags

1

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

• BackSamsung Captivate Glide

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Motherboard               

• Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

Remove back cover using fingernail or plastic opening tool. The cover pulls up and off.

1024

Step 2

• Remove battery with plastic opening tool or finger.

Remove battery with plastic opening tool or finger.

Step 3

• Remove the seven screws from backplate using the #00 screwdriver.

Remove the seven screws from backplate using the #00 screwdriver.

Step 4

• Remove the back plate using the plastic opening tool.
• There is a lip on each side, and both must be pried up.
• You can work your way around the edges after prying the two sides.

Remove the back plate using the plastic opening tool.

There is a lip on each side, and both must be pried up.

You can work your way around the edges after prying the two sides.

Step 5

• Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

Use the plastic opening tool to detach the two tabs connecting the motherboard to the base of the phone.

Step 6

• Disconnect the antenna cable from the motherboard using tweezers.

Disconnect the antenna cable from the motherboard using tweezers.

Step 7

• Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

Remove the single screw connecting the motherboard to the base of the phone by using the #00 Phillips screwdriver.

Step 8

• Lift the motherboard out of the base of the phone.

Lift the motherboard out of the base of the phone.

Step 9

              Speaker               

• Using the plastic opening tool, detach the tab connecting the speaker to the motherboard.

Using the plastic opening tool, detach the tab connecting the speaker to the motherboard.

Step 10

• Remove speaker manually.
• There is nothing connecting it to the motherboard, so just pull.

Remove speaker manually.

There is nothing connecting it to the motherboard, so just pull.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Nicholas Mira                     

Member since: 09/23/2014

280 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       USF Tampa, Team 5-3, Mcgee Fall 2014                        

                                                  Member of USF Tampa, Team 5-3, Mcgee Fall 2014 



                    USFT-MCGEE-F14S5G3                     


                                            4 Members                     


                                            5 Guides authored