Difficulty

Difficult

Steps

7

Time Required

                          5 - 10 minutes

Sections

2

  • Battery
  • 3 steps
  • Rear Case
  • 4 steps

Flags

0

  • BackSamsung Captivate

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.
  • Lift up the back cover.

Remove the back cover by pressing on the bottom section of the phone and sliding the bottom piece downward.

Lift up the back cover.

1024

Step 2

  • Place your finger on the bottom of the battery and lift to remove.

Place your finger on the bottom of the battery and lift to remove.

Step 3

  • Replace the old battery with the new one.

Replace the old battery with the new one.

Step 4

              Rear Case
  • Insert the spudger underneath the bottom section of the phone.
  • Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.

Insert the spudger underneath the bottom section of the phone.

Gently lift and push the spudger to slide the bottom section down to reveal two hidden screws.

Step 5

  • Remove the six 4.5mm #000 Phillips screws.

Remove the six 4.5mm #000 Phillips screws.

Step 6

  • Starting at a bottom corner, use the spudger to separate the rear case from the front display.
  • Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.
  • Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

Starting at a bottom corner, use the spudger to separate the rear case from the front display.

Move the spudger towards the top on both sides. The plastic opening tool is easier to use for this step.

Be careful when detaching the top. Free each side, stopping short of the center of the cover. Apply backward pressure on both corners with a finger applying pressure on the center, and slide the whole back cover toward the bottom of the device. Note: forcing the cover can result in cracked plastic.

Step 7

  • Separate the rear case from the phone.

Separate the rear case from the phone.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.

Author

                                      with 9 other contributors 


                    Christopher

Member since: 10/06/2011

643 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 20-25, Maness Fall 2011                        

                                                  Member of Cal Poly, Team 20-25, Maness Fall 2011 



                    CPSU-MANESS-F11S20G25                     


                                            3 Members                     


                                            9 Guides authored