Difficulty
Moderate
Steps
6
Time Required
5 - 10 minutes
Sections
1
- Battery
- 6 steps
Flags
0
BackSamsung Chromebook 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure your Chromebook is turned off before you begin.
- Set the labtop face down on a flat surface.
Make sure your Chromebook is turned off before you begin.
Set the labtop face down on a flat surface.
1024
Step 2
- Remove the nine 5 mm screws on the bottom cover using a Phillips #0 screwdriver.
Remove the nine 5 mm screws on the bottom cover using a Phillips #0 screwdriver.
Step 3
- Loosen the back cover panel with a plastic opening tool, and work it all the way around the computer.
Loosen the back cover panel with a plastic opening tool, and work it all the way around the computer.
Step 4
- Once the cover is loose, remove the back cover panel using your hands.
Once the cover is loose, remove the back cover panel using your hands.
Step 5
- Unscrew the four 4 mm screws holding the battery in place with a Phillips #0 screwdriver.
Unscrew the four 4 mm screws holding the battery in place with a Phillips #0 screwdriver.
Step 6
- Disconnect the wire that connects the battery to the motherboard by pulling upward.
Disconnect the wire that connects the battery to the motherboard by pulling upward.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Allan
Member since: 02/01/2016
115 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
UW Tacoma, Team 1-3, Rose Winter 2016
Member of UW Tacoma, Team 1-3, Rose Winter 2016
UWT-ROSE-W16S1G3
4 Members
4 Guides authored