Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
1
- Daughterboard
- 7 steps
Flags
0
BackSamsung Chromebook 2 XE503C12-K02US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Daughterboard
- Turn the power off before beginning this step
- It is common for Chromebooks to have rubber circle pads covering the four screws on each of the four corners. You can use any opening tool to remove the rubber circle pads.
- Lay the Chromebook down in a way that the bottom cover faces upward.
- Remove all nine screws from the back cover using a Phillips #00 screw.
Turn the power off before beginning this step
It is common for Chromebooks to have rubber circle pads covering the four screws on each of the four corners. You can use any opening tool to remove the rubber circle pads.
Lay the Chromebook down in a way that the bottom cover faces upward.
Remove all nine screws from the back cover using a Phillips #00 screw.
1024
Step 2
- Place the opening tool in the divot between the spine of the Chromebook and the back cover.
- Slowly glide and push down the end of the opening tool along all sides of the Chromebook to detach the brackets. You will hear the brackets detach.
- Be gentle while prying to avoid breaking the back cover.
Place the opening tool in the divot between the spine of the Chromebook and the back cover.
Slowly glide and push down the end of the opening tool along all sides of the Chromebook to detach the brackets. You will hear the brackets detach.
Be gentle while prying to avoid breaking the back cover.
Step 3
- Remove the four 3 mm screws using a Phillips #000 screwdriver.
- Carefully lift the top of the battery then pull it away from you to remove it.
- Some batteries may be attached via a battery connector. Disconnect the battery connector by simply pulling straight up at its base.
Remove the four 3 mm screws using a Phillips #000 screwdriver.
Carefully lift the top of the battery then pull it away from you to remove it.
Some batteries may be attached via a battery connector. Disconnect the battery connector by simply pulling straight up at its base.
Step 4
- Use a blunt precision tweezer to remove the speaker cord from the daughterboard.
Use a blunt precision tweezer to remove the speaker cord from the daughterboard.
Step 5
- Using a Phillips #00 screwdriver, remove all of the two screws from the daughterboard.
Using a Phillips #00 screwdriver, remove all of the two screws from the daughterboard.
Step 6
- You must first lift the locking bar of the ZIF connector before removing the ribbon cable.
- Gently, remove the orange tape by pulling it outward.
- Using an opening tool, gently pull the daughterboard upward.
You must first lift the locking bar of the ZIF connector before removing the ribbon cable.
Gently, remove the orange tape by pulling it outward.
Using an opening tool, gently pull the daughterboard upward.
Step 7
- Gently pull the daughterboard away from the Chromebook.
- Be gentle because the daughterboard might be a little glued.
Gently pull the daughterboard away from the Chromebook.
Be gentle because the daughterboard might be a little glued.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Nate Duvall
Member since: 05/22/2019
154 Reputation
1 Guide authored
Badges:
3
Team
IUPUI, Team S1-G1, Wilson Summer 2019
Member of IUPUI, Team S1-G1, Wilson Summer 2019
IUPUI-WILSON-SU19S1G1
4 Members
4 Guides authored