Difficulty

Moderate

Steps

11

Time Required

                          20 - 25 minutes

Sections

2

  • Battery
  • 5 steps
  • Screen
  • 6 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSamsung Chromebook 2 XE503C12-K02US

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip device over so that the underside is facing up.
  • Remove nine, 7mm PH#0 screws from the bottom.

Flip device over so that the underside is facing up.

Remove nine, 7mm PH#0 screws from the bottom.

1024

Step 2

  • Using the plastic opening tool, pry open the bottom of the Chromebook case, working all around the computer.
  • Lift the panel out of the way to reveal the battery.

Using the plastic opening tool, pry open the bottom of the Chromebook case, working all around the computer.

Lift the panel out of the way to reveal the battery.

Step 3

  • Remove four, 5mm Phillips #0 screws connecting the battery to the laptop

Remove four, 5mm Phillips #0 screws connecting the battery to the laptop

Step 4

  • Lift the battery, and pull it up and towards you, away from the connector.
  • Be sure to lift gently to avoid damage to connector

Lift the battery, and pull it up and towards you, away from the connector.

Be sure to lift gently to avoid damage to connector

Step 5

  • Using a plastic opening tool, pry the connector up from the contact.
  • Remove the battery from the device.

Using a plastic opening tool, pry the connector up from the contact.

Remove the battery from the device.

Step 6

              Screen
  • Remove the four 5mm Phillips #0 screws on the hinges.

Remove the four 5mm Phillips #0 screws on the hinges.

Step 7

  • Unplug two auxiliary wires leading to the top lid.
  • Using the plastic prying tool, lift the hinge on the connector up and pull the connector away.

Unplug two auxiliary wires leading to the top lid.

Using the plastic prying tool, lift the hinge on the connector up and pull the connector away.

Step 8

  • Lift the hinges up and separate the top lid from the bottom casing.

Lift the hinges up and separate the top lid from the bottom casing.

Step 9

  • Using the plastic prying tool, carefully pry the casing apart from the screen.
  • When prying case apart, there is a risk of screen and parts of the casing shattering and cutting you.

Using the plastic prying tool, carefully pry the casing apart from the screen.

When prying case apart, there is a risk of screen and parts of the casing shattering and cutting you.

Step 10

  • Remove the four 5mm Phillips #0 screws holding the screen in place.

Remove the four 5mm Phillips #0 screws holding the screen in place.

Step 11

  • Lift and remove the screen from the device.

Lift and remove the screen from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Jordan W Jones

Member since: 02/15/2018

397 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Eastern Washington University, Team S1-G3, Carnegie Fall 2018                        

                                                  Member of Eastern Washington University, Team S1-G3, Carnegie Fall 2018 



                    EWU-CARNEGIE-F18S1G3                     


                                            4 Members                     


                                            8 Guides authored