Difficulty
Easy
Steps
3
Time Required
2 - 3 minutes
Sections
1
- Bottom Case
- 3 steps
Flags
0
BackSamsung Chromebook 3 (XE500C13-K02US)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Case
- Place the laptop back cover facing up to expose the screws.
- Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.
Place the laptop back cover facing up to expose the screws.
Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.
1024
Step 2
- Use an iFixit opening tool to wedge in between the case and body of the laptop.
- Once the tool is wedged in between the case and laptop, slide it around the entire laptop’s edge to disengage the retaining clips.
- You should hear a popping sound as you slide the iFixit opening tool around the laptop.
Use an iFixit opening tool to wedge in between the case and body of the laptop.
Once the tool is wedged in between the case and laptop, slide it around the entire laptop’s edge to disengage the retaining clips.
You should hear a popping sound as you slide the iFixit opening tool around the laptop.
Step 3
- Remove the cover exposing the inside of the laptop.
Remove the cover exposing the inside of the laptop.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Mick McCarty
Member since: 03/18/2019
956 Reputation
6 Guides authored
Badges:
8
+5 more badges
Team
University of Memphis, Team S1-G24, Kim Spring 2019
Member of University of Memphis, Team S1-G24, Kim Spring 2019
UM-KIM-S19S1G24
3 Members
6 Guides authored