Difficulty

Easy

Steps

9

Time Required

                          9 - 10 minutes

Sections

3

  • Bottom Case
  • 3 steps
  • Battery
  • 3 steps
  • Speakers
  • 3 steps

Flags

0

  • BackSamsung Chromebook 3 (XE500C13-K02US)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Case
  • Place the laptop back cover facing up to expose the screws.
  • Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.

Place the laptop back cover facing up to expose the screws.

Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.

1024

Step 2

  • Use an iFixit opening tool to wedge in between the case and body of the laptop.
  • Once the tool is wedged in between the case and laptop, slide it around the entire laptop’s edge to disengage the retaining clips.
  • You should hear a popping sound as you slide the iFixit opening tool around the laptop.

Use an iFixit opening tool to wedge in between the case and body of the laptop.

Once the tool is wedged in between the case and laptop, slide it around the entire laptop’s edge to disengage the retaining clips.

You should hear a popping sound as you slide the iFixit opening tool around the laptop.

Step 3

  • Remove the cover exposing the inside of the laptop.

Remove the cover exposing the inside of the laptop.

Step 4

              Battery
  • Remove the four 4.6mm screws with the Phillips #00 screwdriver.

Remove the four 4.6mm screws with the Phillips #00 screwdriver.

Step 5

  • Use the spudger to pry underneath the cable and gently lift the connector up.

Use the spudger to pry underneath the cable and gently lift the connector up.

Step 6

  • Lift the battery up and out of the case.

Lift the battery up and out of the case.

Step 7

              Speakers
  • Remove two 4.9mm silver screws with a Phillips #00 screwdriver.
  • Each speaker only has 1 screw.

Remove two 4.9mm silver screws with a Phillips #00 screwdriver.

Each speaker only has 1 screw.

Step 8

  • Use the spudger to pry the speaker connector sideways out out of the motherboard.
  • Repeat this step for the left speaker.

Use the spudger to pry the speaker connector sideways out out of the motherboard.

Repeat this step for the left speaker.

Step 9

  • Remove the speakers by lifting them upwards and out of the laptop.

Remove the speakers by lifting them upwards and out of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Mick McCarty

Member since: 03/18/2019

956 Reputation

                                      6 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Memphis, Team S1-G24, Kim Spring 2019                        

                                                  Member of University of Memphis, Team S1-G24, Kim Spring 2019 



                    UM-KIM-S19S1G24                     


                                            3 Members                     


                                            6 Guides authored