Difficulty
Moderate
Steps
6
Time Required
25 - 30 minutes
Sections
2
- Screen
- 4 steps
- Front Camera
- 2 steps
Flags
0
BackSamsung Chromebook Series 3 (XE303C12-A01US)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Screen
- Use the iFixit opening tool to get under the front cover and pop it out of place
Use the iFixit opening tool to get under the front cover and pop it out of place
1024
Step 2
- Remove the four 2.9 mm screws with the Phillips #00 Screwdriver bit.
- Using the iFixit opening tool, try to lift up the screen (it is held down by some adhesive).
Remove the four 2.9 mm screws with the Phillips #00 Screwdriver bit.
Using the iFixit opening tool, try to lift up the screen (it is held down by some adhesive).
Step 3
- Lift the lever to release the cable and pull the cable out.
Lift the lever to release the cable and pull the cable out.
Step 4
- You can now remove the screen.
You can now remove the screen.
Step 5
Front Camera
- Disconnect the ribbon cable connected to the front camera assembly.
- You will need to flip up the little black lever to release the cable.
Disconnect the ribbon cable connected to the front camera assembly.
You will need to flip up the little black lever to release the cable.
Step 6
- Use an iFixit opening tool to pry the front camera assembly from the adhesive holding it in place.
Use an iFixit opening tool to pry the front camera assembly from the adhesive holding it in place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Tyler Schultz
Member since: 03/25/2019
480 Reputation
3 Guides authored
Badges:
8
+5 more badges
Team
IUPUI, Team S2-G1, Henning Spring 2019
Member of IUPUI, Team S2-G1, Henning Spring 2019
IUPUI-HENNING-S19S2G1
3 Members
6 Guides authored
Angel Knepper - Apr 28, 2020
Reply
Thanks for posting this! I looked all over youtube and couldn’t find anything so I am relieved to find this tutorial! I haven’t performed the repair yet, but I was wondering if removing the screen is necessary. From what I see, I can access the camera by just removing the bezel. Thanks for your feedback in advance!