Samsung Chromebook Xe500C21 A03Us Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          7 - 15 minutes

Sections

Back Cover
3 steps
Battery
2 steps

Flags

BackSamsung Chromebook XE500C21-A03US
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Cover

Turn the power off before beginning this step.
Most Chromebooks contain rubber circle pads on each of the four corners to cover the screws. In order to remove the rubber pads, simply use any opening tool.
Lay the Chromebook down so that the bottom cover is facing upward.
Using a Phillips #00 screwdriver, remove all seven 5.5 mm screws from the back cover.

Turn the power off before beginning this step.

Most Chromebooks contain rubber circle pads on each of the four corners to cover the screws. In order to remove the rubber pads, simply use any opening tool.

Lay the Chromebook down so that the bottom cover is facing upward.

Using a Phillips #00 screwdriver, remove all seven 5.5 mm screws from the back cover.

1024

Step 2

Place the opening tool in the divot between the spine of the Chromebook and the back cover.
Slowly glide and push down the end of the opening tool along all sides of the Chromebook to detach the brackets. You will hear the brackets detach.

Place the opening tool in the divot between the spine of the Chromebook and the back cover.

Slowly glide and push down the end of the opening tool along all sides of the Chromebook to detach the brackets. You will hear the brackets detach.

Step 3

Using the opening tool, pry off the back cover of the Chromebook
Be gentle while prying to avoid breaking the back cover.

Using the opening tool, pry off the back cover of the Chromebook

Be gentle while prying to avoid breaking the back cover.

Step 4

              Battery

Remove the four 3 mm screws using a Phillips #000 screwdriver.

Remove the four 3 mm screws using a Phillips #000 screwdriver.

Step 5

Carefully lift the top of the battery then pull it away from you to remove it.
Some batteries may be attached via a battery connector. Disconnect the battery connector by simply pulling straight up at its base.

Carefully lift the top of the battery then pull it away from you to remove it.

Some batteries may be attached via a battery connector. Disconnect the battery connector by simply pulling straight up at its base.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Alexis Cortez

Member since: 09/11/2017

228 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       CSU Fullerton, Team S2-G5, Bruce Fall 2017                        

                                                  Member of CSU Fullerton, Team S2-G5, Bruce Fall 2017 



                    CSUF-BRUCE-F17S2G5                     


                                            4 Members                     


                                            12 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team