Difficulty

Moderate

Steps

6

Time Required

                          10 - 25 minutes            

Sections

2

  • Back Panel
  • 4 steps
  • Battery
  • 2 steps

Flags

0

  • BackSamsung Chromebook XE550C22

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Panel               
  • Turn the power off before beginning this step.
  • Using the spudger, remove the four 1/2 inch skid pads from the back of the laptop.

Turn the power off before beginning this step.

Using the spudger, remove the four 1/2 inch skid pads from the back of the laptop.

1024

Step 2

  • Remove the eight 7mm screws using the J0 Screwdriver.

Remove the eight 7mm screws using the J0 Screwdriver.

Step 3

  • Starting at the center front of the laptop, insert the metal spudger between the keyboard panel and the bottom panel, separating the bottom panel from the laptop.
  • Continue prying around the sides to release more brackets.

Starting at the center front of the laptop, insert the metal spudger between the keyboard panel and the bottom panel, separating the bottom panel from the laptop.

Continue prying around the sides to release more brackets.

Step 4

  • After deconnecting all the brackets, pull the back panel away from the laptop.
  • Note: The back panel has some flex to it, don’t be afraid to use some force.

After deconnecting all the brackets, pull the back panel away from the laptop.

Note: The back panel has some flex to it, don’t be afraid to use some force.

Step 5

              Battery               
  • Remove the four 3mm screws holding the battery with the J0 screwdriver.

Remove the four 3mm screws holding the battery with the J0 screwdriver.

Step 6

  • Lift the battery up at an angle to disconnect the battery from the motherboard, then pull it away from the laptop.
  • Do not lift the battery straight up. This will damage the battery’s connectors.

Lift the battery up at an angle to disconnect the battery from the motherboard, then pull it away from the laptop.

Do not lift the battery straight up. This will damage the battery’s connectors.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Brenna Wolfe                     

Member since: 09/11/2017

541 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       CSU Fullerton, Team S2-G7, Bruce Fall 2017                        

                                                  Member of CSU Fullerton, Team S2-G7, Bruce Fall 2017 



                    CSUF-BRUCE-F17S2G7                     


                                            3 Members                     


                                            14 Guides authored