Samsung Clp 300 Fuser Unit Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

• Fuser Unit
• 4 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackSamsung CLP-300

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Fuser Unit               

• Turn the printer off and wait a few minutes for it to cool.
• Turn printer around so that you are looking at the rear panel.

Turn the printer off and wait a few minutes for it to cool.

Turn printer around so that you are looking at the rear panel.

1024

Step 2

• Open back of printer by pushing down handle.

Open back of printer by pushing down handle.

Step 3

• Remove the four screws that attach the fuser unit to the printer.

Remove the four screws that attach the fuser unit to the printer.

Step 4

• Slide fuser unit out of the printer.
• Remove packaging from new fuser unit.
• Insert new fuser unit.

Slide fuser unit out of the printer.

Remove packaging from new fuser unit.

Insert new fuser unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Heather Howard                     

Member since: 10/15/2014

586 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of Maine, Team 1-1, Diaz Fall 2014                        

                                                  Member of University of Maine, Team 1-1, Diaz Fall 2014 



                    UMAINE-DIAZ-F14S1G1                     


                                            3 Members                     


                                            4 Guides authored                     

Dianne Martin - Jun 1, 2019

Reply

how do you unplug the old fuser unit and plug in the new fuser unit - you don’t show how to do that.

Michael R. Glatfelter, Jr. - Jun 27, 2020

Reply

The plug in on the left side, no need to unplug it because it is part of the fuser unit.