Samsung Clp 300 Imaging Unit Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Imaging Unit
4 steps

Flags

BackSamsung CLP-300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Imaging Unit

Turn the printer off and wait a few minutes for it to cool.

Turn the printer off and wait a few minutes for it to cool.

1024

Step 2

Open the front cover

Open the front cover

Step 3

Remove waste toner container from the printer.

Remove waste toner container from the printer.

Step 4

Pull the imaging unit out of the printer using bottom handle.
Use green handle on top of imaging unit to steady unit as you pull it out.
Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit
Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.
If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

Pull the imaging unit out of the printer using bottom handle.

Use green handle on top of imaging unit to steady unit as you pull it out.

Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”

Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit

Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.

If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Heather Howard

Member since: 10/15/2014

586 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Maine, Team 1-1, Diaz Fall 2014                        

                                                  Member of University of Maine, Team 1-1, Diaz Fall 2014 



                    UMAINE-DIAZ-F14S1G1                     


                                            3 Members                     


                                            4 Guides authored

Introduction#

#

#

#

#

#

#

Team#

#

Introduction

Team