Difficulty

Moderate

Steps

3

Time Required

                          10 - 15 minutes            

Sections

1

  • Display Screen
  • 3 steps

Flags

0

  • BackSamsung DV180F

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Screen               
  • Use a pry tool to push the highlighted blue latch away from the battery in the direction of the arrow. Remove the battery.
  • Use the Phillips 000 Bit to remove all screws from the perimeter of the device. Set aside.
  • Use a small Plastic Opening Tool at the seam by the Micro USB plug. Separate the plastic case from the device.

Use a pry tool to push the highlighted blue latch away from the battery in the direction of the arrow. Remove the battery.

Use the Phillips 000 Bit to remove all screws from the perimeter of the device. Set aside.

Use a small Plastic Opening Tool at the seam by the Micro USB plug. Separate the plastic case from the device.

1024

Step 2

  • Remove the outer casing holding the back part of the camera together. Leave on the front casing.
  • Use a Phillips screwdriver to remove the two small screws holding the outer casing to the mother board.
  • Use the prying tool to unhook the casing from the plate covering the motherboard

Remove the outer casing holding the back part of the camera together. Leave on the front casing.

Use a Phillips screwdriver to remove the two small screws holding the outer casing to the mother board.

Use the prying tool to unhook the casing from the plate covering the motherboard

Step 3

  • Release the ribbon from the button casing connected to the motherboard.
  • Hold the metal casing out of the way and snap the ribbon connector back. Remove the display screen ribbon attached.
  • Replace the screen then repeat all of these steps in reverse order to reassemble.

Release the ribbon from the button casing connected to the motherboard.

Hold the metal casing out of the way and snap the ribbon connector back. Remove the display screen ribbon attached.

Replace the screen then repeat all of these steps in reverse order to reassemble.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Evan McGettrick                     

Member since: 09/24/2016

190 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team 14-4, Eyestone Fall 2016                        

                                                  Member of USF Tampa, Team 14-4, Eyestone Fall 2016 



                    USFT-EYESTONE-F16S14G4                     


                                            4 Members                     


                                            8 Guides authored                     

lrrpbill68 - Jul 25, 2018

Reply

I got it open in the hope of finding a screen ID. I can not find a replacement screen for the DV180F. do you know if the DV150 screen will work?

Sidath Paranavithane - Jan 17, 2019

im looking for a screen as well were you able to find a replacement?