Difficulty
Moderate
Steps
3
Time Required
3 minutes
Sections
1
- Front and Rear Casing
- 3 steps
Flags
2
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung DV300F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front and Rear Casing
- Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
- Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
- Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.
1024
Step 2
- Remove the back case of the camera carefully.
Remove the back case of the camera carefully.
Step 3
- Remove the front case of the camera.
- Remove the front LCD screen from the front case next to the lens.
Remove the front case of the camera.
Remove the front LCD screen from the front case next to the lens.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 9 other contributors
Timothy Gordon
Member since: 03/23/2015
805 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
Baylor, Team 5-10, Williams Spring 2015
Member of Baylor, Team 5-10, Williams Spring 2015
BU-WILLIAMS-S15S5G10
3 Members
10 Guides authored