Difficulty
Moderate
Steps
8
Time Required
5 - 10 minutes
Sections
4
- Front and Rear Casing
- 3 steps
- Back Button Control
- 1 step
- Back LCD Screen
- 2 steps
- Front LCD Screen
- 2 steps
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackSamsung DV300F
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If your Samsung DV300F is displaying black spots, discolored areas, or blurred sections , it is time to replace the LCD screen.
What you need
Step 1
Front and Rear Casing
- Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
- Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
- Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the right side of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the left side of the camera using a Phillips #0 screwdriver.
Remove the two black 4.2 mm screws on the bottom of the camera using a Phillips #0 screwdriver.
1024
Step 2
- Remove the back case of the camera carefully.
Remove the back case of the camera carefully.
Step 3
- Remove the front case of the camera.
- Remove the front LCD screen from the front case next to the lens.
Remove the front case of the camera.
Remove the front LCD screen from the front case next to the lens.
Step 4
Back Button Control
- Remove the blue button control from its position next to the LCD screen.
- Pull the ribbon cable to disconnect the blue button control from the camera.
Remove the blue button control from its position next to the LCD screen.
Pull the ribbon cable to disconnect the blue button control from the camera.
Step 5
Back LCD Screen
- Remove the back LCD screen from its place carefully.
Remove the back LCD screen from its place carefully.
Step 6
- Flip the black tab where the back LCD screen connects to the circuit board.
- Pull the tape connection to disconnect the back LCD screen from the circuit board.
Flip the black tab where the back LCD screen connects to the circuit board.
Pull the tape connection to disconnect the back LCD screen from the circuit board.
Step 7
Front LCD Screen
- Unscrew the 3 silver 4.5 mm screws from the circuit board using a Phillips #0 screwdriver.
- Remove the circuit board cover.
Unscrew the 3 silver 4.5 mm screws from the circuit board using a Phillips #0 screwdriver.
Remove the circuit board cover.
Step 8
- Flip the black tab where the front LCD screen connects to the circuit board.
- Pull the tape connection to disconnect the front LCD screen from the circuit board.
- You can do this easily with your fingers.
- Remove the front LCD screen from the front of the camera.
Flip the black tab where the front LCD screen connects to the circuit board.
Pull the tape connection to disconnect the front LCD screen from the circuit board.
You can do this easily with your fingers.
Remove the front LCD screen from the front of the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 7 other contributors
Timothy Gordon
Member since: 03/23/2015
805 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
Baylor, Team 5-10, Williams Spring 2015
Member of Baylor, Team 5-10, Williams Spring 2015
BU-WILLIAMS-S15S5G10
3 Members
10 Guides authored
