Difficulty
Moderate
Steps
10
Time Required
15 - 30 minutes
Sections
3
- Cover
- 3 steps
- Disk Tray Replacement
- 5 steps
- Power Button
- 2 steps
Flags
2
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung DVD-HD850
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Cover
- with the front of the device facing you, turn the device 180 degrees so the back panel of the device is facing you
with the front of the device facing you, turn the device 180 degrees so the back panel of the device is facing you
1024
Step 2
Locate and remove screws
- locate the three (3) screws on the back panel of the device that are implanted in the device
- to remove the screws, use the tool(s) listed above (right underneath the introduction) and twist the screws counter-clockwise to remove them from the device
locate the three (3) screws on the back panel of the device that are implanted in the device
to remove the screws, use the tool(s) listed above (right underneath the introduction) and twist the screws counter-clockwise to remove them from the device
Step 3
Remove Cover
- to remove the cover of the device, pull the cover towards the back of the device until it is completely removed so you can see the insides of the device
to remove the cover of the device, pull the cover towards the back of the device until it is completely removed so you can see the insides of the device
Step 4
Locate and Remove The Disk Tray
- NOTE remember to never connect to power when working on electrical components
- Find and locate the disk tray it is located top right hand side of the component when the back of the device ( dvd player ) is facing you.
NOTE remember to never connect to power when working on electrical components
Find and locate the disk tray it is located top right hand side of the component when the back of the device ( dvd player ) is facing you.
Step 5
Removing The Data Strips
- Locate and gently remove the data strips on the tray. There are three in total, two on the left hand side and one on the right.
Locate and gently remove the data strips on the tray. There are three in total, two on the left hand side and one on the right.
Step 6
Removing The Screws
- As noted by the red circles, locate and remove the screws one at a time
As noted by the red circles, locate and remove the screws one at a time
Step 7
Disk Tray Removal
- After removing the clips slowly incline the disk drive towards you and unclip it from the two (2) brackets located on the top
- Be careful not to push too much pressure on the brackets since they tend to break easily
After removing the clips slowly incline the disk drive towards you and unclip it from the two (2) brackets located on the top
Be careful not to push too much pressure on the brackets since they tend to break easily
Step 8
Success!
- Congrats! You have sucessfully have taken out the disk drive
Congrats! You have sucessfully have taken out the disk drive
Step 9
Unscrew power button circuit board
- Unscrew the one screw that is connecting the circuit board to the frame.
Unscrew the one screw that is connecting the circuit board to the frame.
Step 10
Remove power button circuit board
- Jiggle the circuit board until it becomes loose from the two prongs holding it in place.
- Replace with a new one.
Jiggle the circuit board until it becomes loose from the two prongs holding it in place.
Replace with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Robert Moss
Member since: 10/22/2014
201 Reputation
2 Guides authored
Badges:
3
Team
UMass Dartmouth, Team 1-6, Duarte Fall 2014
Member of UMass Dartmouth, Team 1-6, Duarte Fall 2014
UMASSD-DUARTE-F14S1G6
3 Members
7 Guides authored
