Difficulty
Moderate
Steps
9
Time Required
15 - 20 minutes
Sections
2
- Back Case
- 4 steps
- Camera
- 5 steps
Flags
1
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
BackSamsung Eternity
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Case
- Remove the back battery cover.
Remove the back battery cover.
1024
Step 2
- Remove the phone’s battery.
Remove the phone’s battery.
Step 3
- Remove six (4.28 x 1.25)mm screws.
Remove six (4.28 x 1.25)mm screws.
Step 4
- Use the spudger to gently pry the silver plastic back plate from the body of the phone.
Use the spudger to gently pry the silver plastic back plate from the body of the phone.
Step 5
Camera
- Peel off the Identification sticker.
Peel off the Identification sticker.
Step 6
- Peel the button sensor on the side of the motherboard off of the case.
Peel the button sensor on the side of the motherboard off of the case.
Step 7
- Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
Pop the black hinged-release lever toward its ribbon, then slide the ribbon out.
Step 8
- Peel up the camera attachment.
Peel up the camera attachment.
Step 9
- You will now be able to replace the Camera component with a new part.
You will now be able to replace the Camera component with a new part.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Michelle Haddock
Member since: 04/20/2011
42 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 15-11, Regan Spring 2011
Member of Cal Poly, Team 15-11, Regan Spring 2011
CPSU-REGAN-S11S15G11
5 Members
14 Guides authored