Difficulty

Moderate

Steps

11

Time Required

                          3 - 6 minutes

Sections

4

  • Battery
  • 2 steps
  • Top Rear Housing Cover
  • 4 steps
  • Midframe
  • 4 steps
  • Loudspeaker
  • 1 step

Flags

0

  • BackSamsung Exhibit II 4G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Insert plastic opening tool under back cover.
  • Apply pressure on tool while using a downward motion to pop off back cover.

Insert plastic opening tool under back cover.

Apply pressure on tool while using a downward motion to pop off back cover.

1024

Step 2

  • Insert plastic opening tool under battery.
  • Pry battery out.

Insert plastic opening tool under battery.

Pry battery out.

Step 3

              Top Rear Housing Cover
  • Insert plastic opening tool under back cover.
  • Pry the top cover upward to remove it from the phone.

Pry the top cover upward to remove it from the phone.

Step 4

  • Remove the top cover.

Remove the top cover.

Step 5

  • Remove the four 3.8mm Phillips #000 screws securing the top cover to the back assembly.
  • Two screws from top and two screws from back.

Remove the four 3.8mm Phillips #000 screws securing the top cover to the back assembly.

Two screws from top and two screws from back.

Step 6

  • Insert plastic opening tool under top cover.
  • Using hand slide top cover away from phone.

Insert plastic opening tool under top cover.

Using hand slide top cover away from phone.

Step 7

              Midframe
  • Remove the four 3.8mm Phillips #000 screws securing the back assembly to the phone.

Remove the four 3.8mm Phillips #000 screws securing the back assembly to the phone.

Step 8

  • Insert plastic opening tool between back assembly and phone.
  • Pry the back assembly away from phone.

Insert plastic opening tool between back assembly and phone.

Pry the back assembly away from phone.

Step 9

  • With plastic opening tool continue prying around the edge of the back assembly.

With plastic opening tool continue prying around the edge of the back assembly.

Step 10

  • Pull back panel assembly away from main body.

Pull back panel assembly away from main body.

Step 11

              Loudspeaker
  • Position Back Panel Assembly so the internal Loudspeaker unit is facing up.
  • With your index fingers and thumbs, grasp the Back Panel Assembly near the Loudspeaker.
  • Twist your palms inward to apply pressure against your index fingers.
  • The Loudspeaker will easily pop out.

Position Back Panel Assembly so the internal Loudspeaker unit is facing up.

With your index fingers and thumbs, grasp the Back Panel Assembly near the Loudspeaker.

Twist your palms inward to apply pressure against your index fingers.

The Loudspeaker will easily pop out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    David R

Member since: 07/20/2015

1,152 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team 1-3, Rowley SU 2015                        

                                                  Member of Eastern Washington University, Team 1-3, Rowley SU 2015 



                    EWU-ROWLEY-SU15S1G3                     


                                            4 Members                     


                                            9 Guides authored