Difficulty

Moderate

Steps

12

Time Required

                          3 - 6 minutes

Sections

4

  • Battery
  • 2 steps
  • Top Rear Housing Cover
  • 4 steps
  • Midframe
  • 4 steps
  • Rear Facing Camera
  • 2 steps

Flags

0

  • BackSamsung Exhibit II 4G

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Insert plastic opening tool under back cover.
  • Apply pressure on tool while using a downward motion to pop off back cover.

Insert plastic opening tool under back cover.

Apply pressure on tool while using a downward motion to pop off back cover.

1024

Step 2

  • Insert plastic opening tool under battery.
  • Pry battery out.

Insert plastic opening tool under battery.

Pry battery out.

Step 3

              Top Rear Housing Cover
  • Insert plastic opening tool under back cover.
  • Pry the top cover upward to remove it from the phone.

Pry the top cover upward to remove it from the phone.

Step 4

  • Remove the top cover.

Remove the top cover.

Step 5

  • Remove the four 3.8mm Phillips #000 screws securing the top cover to the back assembly.
  • Two screws from top and two screws from back.

Remove the four 3.8mm Phillips #000 screws securing the top cover to the back assembly.

Two screws from top and two screws from back.

Step 6

  • Insert plastic opening tool under top cover.
  • Using hand slide top cover away from phone.

Insert plastic opening tool under top cover.

Using hand slide top cover away from phone.

Step 7

              Midframe
  • Remove the four 3.8mm Phillips #000 screws securing the back assembly to the phone.

Remove the four 3.8mm Phillips #000 screws securing the back assembly to the phone.

Step 8

  • Insert plastic opening tool between back assembly and phone.
  • Pry the back assembly away from phone.

Insert plastic opening tool between back assembly and phone.

Pry the back assembly away from phone.

Step 9

  • With plastic opening tool continue prying around the edge of the back assembly.

With plastic opening tool continue prying around the edge of the back assembly.

Step 10

  • Pull back panel assembly away from main body.

Pull back panel assembly away from main body.

Step 11

              Rear Facing Camera
  • Use the flat end of a spudger to disconnect the camera assembly cable.

Use the flat end of a spudger to disconnect the camera assembly cable.

Step 12

  • Remove camera from square housing.

Remove camera from square housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    David R

Member since: 07/20/2015

1,152 Reputation

                                      9 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Eastern Washington University, Team 1-3, Rowley SU 2015                        

                                                  Member of Eastern Washington University, Team 1-3, Rowley SU 2015 



                    EWU-ROWLEY-SU15S1G3                     


                                            4 Members                     


                                            9 Guides authored