Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes

Sections

3

  • Back Case
  • 2 steps
  • Battery
  • 1 step
  • Speaker
  • 5 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackSamsung Fascinate

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Case
  • To remove the back case of the Samsung Galaxy S, you may need a spudger.
  • Identify the slit which is at the bottom edge of the phone.

To remove the back case of the Samsung Galaxy S, you may need a spudger.

Identify the slit which is at the bottom edge of the phone.

1024

Step 2

  • Insert the edge of the spudger into the slit and use it to pry the back case off of the phone.

Insert the edge of the spudger into the slit and use it to pry the back case off of the phone.

Step 3

              Battery
  • Insert the spudger into the space between the battery and the phone and pry the battery out as you slide it along the underside the battery.

Insert the spudger into the space between the battery and the phone and pry the battery out as you slide it along the underside the battery.

Step 4

              Speaker
  • Use the screwdriver to unscrew each of the 6 silver screws holding the main case to the LCD touchscreen.
  • If the screws are stuck, use the spudger to pry them out.

Use the screwdriver to unscrew each of the 6 silver screws holding the main case to the LCD touchscreen.

If the screws are stuck, use the spudger to pry them out.

Step 5

  • Use the plastic opening tool to pry the main case from the LCD touchscreen.
  • Insert the thin edge of the plastic opening tool into the groove between the silver edge and black edge.
  • Run the tool all the way around the edge of the phone until you hear each of the clips detach.

Use the plastic opening tool to pry the main case from the LCD touchscreen.

Insert the thin edge of the plastic opening tool into the groove between the silver edge and black edge.

Run the tool all the way around the edge of the phone until you hear each of the clips detach.

Step 6

  • Once the clips are detached, separate the main case from the LCD touchscreen.

Once the clips are detached, separate the main case from the LCD touchscreen.

Step 7

  • Use the spudger to pry out the grey rubber rectangular component from the main case.

Use the spudger to pry out the grey rubber rectangular component from the main case.

Step 8

  • Use the spudger to pry along the groove between the speaker and the main case.
  • Once the speaker is unclipped it should pop out easily.

Use the spudger to pry along the groove between the speaker and the main case.

Once the speaker is unclipped it should pop out easily.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 5 other contributors 


                    Kevin Carlson

Member since: 04/22/2011

236 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 25-25, Garner Spring 2011                        

                                                  Member of Cal Poly, Team 25-25, Garner Spring 2011 



                    CPSU-GARNER-S11S25G25                     


                                            4 Members                     


                                            6 Guides authored