Samsung Galaxy A10 Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 - 10 minutes

Sections

Samsung Galaxy A10 SIM Tray Replacement
2 steps
Back Cover
6 steps

Flags

BackSamsung Galaxy A10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Samsung Galaxy A10 SIM Tray Replacement

Insert a SIM card eject tool, a SIM eject bit or a straightened paper clip into the hole on the SIM tray located at the left side of the phone.
Press firmly to eject the tray.

Insert a SIM card eject tool, a SIM eject bit or a straightened paper clip into the hole on the SIM tray located at the left side of the phone.

Press firmly to eject the tray.

1024

Step 2

Remove the SIM card tray.
When reinserting the cards, make sure to properly orient them in the tray.

Remove the SIM card tray.

When reinserting the cards, make sure to properly orient them in the tray.

Step 3

              Back Cover

The back cover is held in place by plastic clips.
Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.

The back cover is held in place by plastic clips.

Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.

Step 4

Slide the opening pick to the bottom left corner to release the clips.

Slide the opening pick to the bottom left corner to release the clips.

Step 5

Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.

Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.

Step 6

Slide the opening pick from the top left corner to the top right corner to release the plastic clips.

Slide the opening pick from the top left corner to the top right corner to release the plastic clips.

Step 7

Slide the opening pick from the top left corner to the bottom right corner to release the remaining clips.

Slide the opening pick from the top left corner to the bottom right corner to release the remaining clips.

Step 8

Remove the back cover.

Remove the back cover.

To reassemble your device, follow these instructions in reverse order. Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

                                                                                      9 other people completed this guide.

Author

                                      with 1 other contributor

                    Adriana Zwink

Member since: 12/18/2019

36,607 Reputation

                                      167 Guides authored                  



                       Badges:
                       34







                                                        +31 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored

LambdaMisc - Nov 13, 2022

why is this moderate

Introduction#

What you need#

Team#

Introduction

What you need

Team