Samsung Galaxy A10E Back Cover Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          5 - 10 minutes            

Sections

2

• SIM Card
• 2 steps
• Back Cover
• 6 steps

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSamsung Galaxy A10e

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              SIM Card               

• Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.
• Press to eject the tray.

Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.

Press to eject the tray.

1024

Step 2

• Remove the SIM card tray from the phone.
• The SIM card(s) and SD card will fall out of the tray easily.
• When reinserting the tray, ensure the SIM card and SD card are in the correct slots and oriented correctly.
• For dual-SIM versions of this phone, there may be two SIM cards. Ensure the SIM cards are placed in the slots corresponding to the correct phone lines.

Remove the SIM card tray from the phone.

The SIM card(s) and SD card will fall out of the tray easily.

When reinserting the tray, ensure the SIM card and SD card are in the correct slots and oriented correctly.

For dual-SIM versions of this phone, there may be two SIM cards. Ensure the SIM cards are placed in the slots corresponding to the correct phone lines.

Step 3

              Back Cover               

• The back cover is held in place by plastic clips.
• Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.

The back cover is held in place by plastic clips.

Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.

Step 4

• Slide the opening pick to the bottom left corner to release the clips.

Slide the opening pick to the bottom left corner to release the clips.

Step 5

• Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.

Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.

Step 6

• Slide the opening pick from the top left corner to the top right corner to release the plastic clips.

Slide the opening pick from the top left corner to the top right corner to release the plastic clips.

Step 7

• Slide the opening pick from the top right corner to the bottom right corner to release the remaining clips.

Slide the opening pick from the top right corner to the bottom right corner to release the remaining clips.

Step 8

• Remove the back cover.

Remove the back cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      7 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Thomas Boland                     

Member since: 09/29/2020

1,407 Reputation

                                      5 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges