Difficulty
Moderate
Steps
12
Time Required
15 - 25 minutes
Sections
3
- SIM Card
- 2 steps
- Back Cover
- 6 steps
- Motherboard Cover
- 4 steps
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSamsung Galaxy A10e
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
SIM Card
- Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.
- Press to eject the tray.
Insert a SIM card eject tool, bit, or a straightened paperclip into the small hole in the SIM card tray.
Press to eject the tray.
1024
Step 2
- Remove the SIM card tray from the phone.
- The SIM card(s) and SD card will fall out of the tray easily.
- When reinserting the tray, ensure the SIM card and SD card are in the correct slots and oriented correctly.
- For dual-SIM versions of this phone, there may be two SIM cards. Ensure the SIM cards are placed in the slots corresponding to the correct phone lines.
Remove the SIM card tray from the phone.
The SIM card(s) and SD card will fall out of the tray easily.
When reinserting the tray, ensure the SIM card and SD card are in the correct slots and oriented correctly.
For dual-SIM versions of this phone, there may be two SIM cards. Ensure the SIM cards are placed in the slots corresponding to the correct phone lines.
Step 3
Back Cover
- The back cover is held in place by plastic clips.
- Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.
The back cover is held in place by plastic clips.
Insert an opening pick between the screen and the back cover on the bottom of the phone where the charging port is located.
Step 4
- Slide the opening pick to the bottom left corner to release the clips.
Slide the opening pick to the bottom left corner to release the clips.
Step 5
- Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.
Slide the opening pick along the left edge to the top left corner of the phone, to release the clips.
Step 6
- Slide the opening pick from the top left corner to the top right corner to release the plastic clips.
Slide the opening pick from the top left corner to the top right corner to release the plastic clips.
Step 7
- Slide the opening pick from the top right corner to the bottom right corner to release the remaining clips.
Slide the opening pick from the top right corner to the bottom right corner to release the remaining clips.
Step 8
- Remove the back cover.
Remove the back cover.
Step 9
Motherboard Cover
- Remove screws from the motherboard antenna cover.
- 3 Phillips #00, 3mm length.
Remove screws from the motherboard antenna cover.
3 Phillips #00, 3mm length.
Step 10
- Use the tip of a spudger or tweezers to remove the antenna cover.
Use the tip of a spudger or tweezers to remove the antenna cover.
Step 11
- Remove screws from the motherboard cover.
- 3 Phillips #00, 3mm length
Remove screws from the motherboard cover.
3 Phillips #00, 3mm length
Step 12
- Use the tip of a spudger or tweezers to remove the motherboard cover.
Use the tip of a spudger or tweezers to remove the motherboard cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
Thomas Boland
Member since: 09/29/2020
1,407 Reputation
5 Guides authored
Badges:
8
+5 more badges
amandacrockett385 - Nov 7, 2022
Reply
I have looked literally everywhere and nobody is covering the top motherboard 2 connectors w/ Ribbons on top the black squares one camera and the 1 to the right how does that 1 to the right connect with the ribbon please help thank you
