Difficulty

Moderate

Steps

6

Time Required

                          10 - 20 minutes

Sections

1

  • Back Cover
  • 6 steps

Flags

0

  • BackSamsung Galaxy A20e

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the SIM tray
  • Before starting repairs, take your Galaxy A20e off the charger and power it down.
  • Insert a SIM card eject tool, a SIM eject bit or a straightened paper clip into the hole on the SIM tray located on the left side of the phone.
  • Press your SIM card eject tool firmly into the hole in order to eject the SIM card tray.
  • Remove the SIM card tray.
  • When reinserting the cards, make sure to properly orient them in the tray.

Before starting repairs, take your Galaxy A20e off the charger and power it down.

Insert a SIM card eject tool, a SIM eject bit or a straightened paper clip into the hole on the SIM tray located on the left side of the phone.

Press your SIM card eject tool firmly into the hole in order to eject the SIM card tray.

Remove the SIM card tray.

When reinserting the cards, make sure to properly orient them in the tray.

1024

Step 2

              Unclip the plastic clips
  • The back cover is held in place by plastic clips.
  • Insert an opening pick between the screen and the back cover on the left edge next to the hole for the SIM-eject tool.

The back cover is held in place by plastic clips.

Insert an opening pick between the screen and the back cover on the left edge next to the hole for the SIM-eject tool.

Step 3

  • Slide the opening pick around the bottom left corner to unclip the plastic clips.

Slide the opening pick around the bottom left corner to unclip the plastic clips.

Step 4

  • Slide the opening pick along the bottom edge to unclip the plastic clips.

Slide the opening pick along the bottom edge to unclip the plastic clips.

Step 5

  • Slide the opening pick along the right edge to the top right corner to unclip the plastic clips.

Slide the opening pick along the right edge to the top right corner to unclip the plastic clips.

Step 6

              Remove the back cover
  • Separate the phone assembly from the back cover.

Separate the phone assembly from the back cover.

To reassemble your device, follow these instructions in reverse order.Take your e-waste to an R2 or e-Stewards certified recycler.Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                    Adriana Zwink

Member since: 12/18/2019

36,607 Reputation

                                      167 Guides authored                  



                       Badges:
                       34







                                                        +31 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored