Difficulty
Moderate
Steps
12
Time Required
25 minutes
Sections
1
- Display Assembly
- 12 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSamsung Galaxy A20e
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Video Overview
Step 1
Display Touch Screen Assembly Spare part
- This is Display Touch Screen Assembly with Frame
This is Display Touch Screen Assembly with Frame
1024
Step 2
Back Cover Removal
- Remove the SIM tray
- To remove the back cover use a plastic opening tool
- When you remove the back cover, press the Touch ID to unstick it from the back cover
Remove the SIM tray
To remove the back cover use a plastic opening tool
When you remove the back cover, press the Touch ID to unstick it from the back cover
Step 3
Fingerprint Sensor Removal
- With a Phillips Screwdriver remove all the screws
- With a Plastic Opening Tool:
- Remove the Antenna Assembly
- Disconnect and remove the Touch ID Fingerprint Sensor
With a Phillips Screwdriver remove all the screws
With a Plastic Opening Tool:
Remove the Antenna Assembly
Disconnect and remove the Touch ID Fingerprint Sensor
Step 4
Logic Board Cover Removal
- Remove the Logic Board Plastic Cover
- Remove the Sup-board Plastic Cover
Remove the Logic Board Plastic Cover
Remove the Sup-board Plastic Cover
Step 5
Test the New Spare part
- Its time to test the new spare part
- Do not forget to disconnect the battery before you start working on the device.
Its time to test the new spare part
Do not forget to disconnect the battery before you start working on the device.
Step 6
Logic Board Removal - Part 1
- Disconnect the Battery
- Disconnect the Sup-board Flex Cable
- Disconnect the Coaxial Antenna Cables. Do it very carefully because you can easily damage them
Disconnect the Battery
Disconnect the Sup-board Flex Cable
Disconnect the Coaxial Antenna Cables. Do it very carefully because you can easily damage them
Step 7
Logic Board Removal - Part 2
- Remove the Sup-board Flex Cable
- Disconnect the Volume buttons Flex Cable
- Gently remove the Logic board. Be careful for the cameras
Remove the Sup-board Flex Cable
Disconnect the Volume buttons Flex Cable
Gently remove the Logic board. Be careful for the cameras
Step 8
Sup-board removal
- Use Hot air to soften the adhesive and gently remove the sup-bord
- Its better to use a plastic tools
Use Hot air to soften the adhesive and gently remove the sup-bord
Its better to use a plastic tools
Step 9
Battery Removal
- To remove the Battery use a few drops of alcohol and warm the device.
To remove the Battery use a few drops of alcohol and warm the device.
Step 10
Transfer the Receiver, Loudspeaker and the Vibration-motor
- Now you have to transfer:
- Receiber
- Vibromotor
- Loudspeacker
- Remove the transport tapes from:
- Silicon Thermal Pad
- Front Camera Hole
- Use Hot Air to do this easily
Now you have to transfer:
Receiber
Vibromotor
Loudspeacker
Remove the transport tapes from:
Silicon Thermal Pad
Front Camera Hole
Use Hot Air to do this easily
Step 11
Battery
- Use Double side Adhesive tape to install the battery to the new frame
Use Double side Adhesive tape to install the battery to the new frame
Step 12
- “All’s Well That Ends Well.”
“All’s Well That Ends Well.”
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
17 other people completed this guide.
Author
with 3 other contributors
ZFix
Member since: 12/09/2013
187,195 Reputation
330 Guides authored
Badges:
35
+32 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
