Difficulty

Moderate

Steps

7

Time Required

                          40 minutes            

Sections

1

  • Screen with Frame
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSamsung Galaxy A51

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Samsung Galaxy A51 Screen with Frame               
  • Samsung Galaxy A51 - the new spare part.

Samsung Galaxy A51 - the new spare part.

1024

Step 2

              Back Cover               
  • Warm up the device to soften the adhesive.
  • Use suction cup and plastic tools (playing cards) to separate the back cover.

Warm up the device to soften the adhesive.

Use suction cup and plastic tools (playing cards) to separate the back cover.

Step 3

              SIM Tray and screws               
  • Remove the SIM Tray.
  • Remove 13x Phillips screws.

Remove the SIM Tray.

Remove 13x Phillips screws.

Step 4

              Middle Frame removal               
  • Only use plastic tools to separate the metal frame.

Only use plastic tools to separate the metal frame.

Step 5

              Test the new spare part               
  • Test the new spare part.

Test the new spare part.

Step 6

  • Disconnect and remove the main flex cable.
  • To remove the fingerprint sensor - remove two Philips screws and disconnect the flex cable.
  • Disconnect coaxial antenna cable.

Disconnect and remove the main flex cable.

To remove the fingerprint sensor - remove two Philips screws and disconnect the flex cable.

Disconnect coaxial antenna cable.

Step 7

  • Remove the Sub -board? Charging board.
  • The motherboard is secured by one small black screw, remove it to separate the board.
  • Don’t forget to transfer the receiver.

Remove the Sub -board? Charging board.

The motherboard is secured by one small black screw, remove it to separate the board.

Don’t forget to transfer the receiver.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored