Samsung Galaxy Ace Touch Screen Glass Lcd Display Earpiece Loudspeaker Main Camera Replacement Repair Guide

Difficulty

Moderate

Steps

13

Time Required

                          15 - 30 minutes            

Sections

1

• Touch screen Glass, LCD Display, Earpiece, Loudspeaker, Main Camera
• 13 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackSamsung Galaxy Ace

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Video Overview

Step 1

              Touch screen Glass, LCD Display, Earpiece, Loudspeaker, Main Camera               

• Switch off the phone.
• Remove the battery and any installed SIM and memory card.

Switch off the phone.

Remove the battery and any installed SIM and memory card.

1024

Step 2

• Remove the 7 Phillips screws.
• Use a plastic tool to remove the back cover.
• vibrating motor

Remove the 7 Phillips screws.

Use a plastic tool to remove the back cover.

vibrating motor

Step 3

• Disconnect the earpiece & light sensor flex cable.
• Take off the Volume Up/Down buttons flex cable.
• Do the same with the Power button flex cable.
• Be careful don’t brake the flex cables.

Disconnect the earpiece & light sensor flex cable.

Take off the Volume Up/Down buttons flex cable.

Do the same with the Power button flex cable.

Be careful don’t brake the flex cables.

Step 4

• Lift the microphone.
• Lift the board from the right side and disconnect the LCD display flex cable.
• Remove the board from the middle frame.

Lift the microphone.

Lift the board from the right side and disconnect the LCD display flex cable.

Remove the board from the middle frame.

Step 5

• This is the main camera.

This is the main camera.

Step 6

• This is the loudspeaker & audio jack connector module.

This is the loudspeaker & audio jack connector module.

Step 7

• Loudspeaker and light sensor module,

Loudspeaker and light sensor module,

Step 8

• Disconnect the touch screen flex cable.

Disconnect the touch screen flex cable.

Step 9

• Use a hair dryer and warm the touch screen glass to make adhesive soften.
• Use a plastic tool for separating the glass from the middle frame.

Use a hair dryer and warm the touch screen glass to make adhesive soften.

Use a plastic tool for separating the glass from the middle frame.

Step 10

• Again by using a plastic tool, separate the LCD display from the middle frame.

Again by using a plastic tool, separate the LCD display from the middle frame.

Step 11

• Clean the middle frame and install the LCD display.

Clean the middle frame and install the LCD display.

Step 12

• Install the touch screen and start with reassembling.

Install the touch screen and start with reassembling.

Step 13

• That is all.
• .
• .
• .
• .
• Did you do it successfully?

That is all.

.

Did you do it successfully?

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      23 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35





                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored