Difficulty
Moderate
Steps
13
Time Required
10 minutes
Sections
3
- Battery
- 4 steps
- Rear Housing
- 3 steps
- Logic Board
- 6 steps
Flags
2
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung Galaxy Attain 4G
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Placement
- Begin by turn the device over to it’s back, with the screen facing down.
Begin by turn the device over to it’s back, with the screen facing down.
1024
Step 2
Battery Door Removal
- At the top of the device there is a small notch that is used to remove the battery door.
- Using a pry tool or your fingernail, pry off the battery door from the main housing.
At the top of the device there is a small notch that is used to remove the battery door.
Using a pry tool or your fingernail, pry off the battery door from the main housing.
Step 3
Battery Removal
- Place the battery door to the side.
- Using a pry tool or your fingernail, pry the battery up towards you.
- You have now removed the battery!
Place the battery door to the side.
Using a pry tool or your fingernail, pry the battery up towards you.
You have now removed the battery!
Step 4
Heads Up!
- Make sure when replacing the battery that the arrow on the bottom is facing down.
Make sure when replacing the battery that the arrow on the bottom is facing down.
Step 5
Screw Removal
- Remove the 6 Phillips head screws that hold the rear housing in place.
Remove the 6 Phillips head screws that hold the rear housing in place.
Step 6
Prying
- Using a spudger or plastic pry tool, slowly go around the phone between the display & rear housing to release the clips.
Using a spudger or plastic pry tool, slowly go around the phone between the display & rear housing to release the clips.
Step 7
Remove Housing
- Lift the rear housing from the display assembly.
Lift the rear housing from the display assembly.
Step 8
Logic Board
- Using your spudger/plastic pry tool, disconnect the headphone jack flex cable.
Using your spudger/plastic pry tool, disconnect the headphone jack flex cable.
Step 9
- Using your spudger/plastic pry tool, disconnect the rear speaker flex cable.
Using your spudger/plastic pry tool, disconnect the rear speaker flex cable.
Step 10
- Using a spudger/pry tool, carefully remove the vibration motor from its housing. This has a mild adhesive on the bottom.
Using a spudger/pry tool, carefully remove the vibration motor from its housing. This has a mild adhesive on the bottom.
Step 11
- After removing both flex cables, slowly move the logic board to the left of the screen assembly.
- Do not try and remove the logic board all the way, as you still have to remove the display assembly flex cable!
After removing both flex cables, slowly move the logic board to the left of the screen assembly.
Do not try and remove the logic board all the way, as you still have to remove the display assembly flex cable!
Step 12
- Using your spudger/plastic pry tool, disconnect the LCD/Digitizer flex cable.
Using your spudger/plastic pry tool, disconnect the LCD/Digitizer flex cable.
Step 13
- You have now removed the logic board from the display assembly.
You have now removed the logic board from the display assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Josh Forester
Member since: 11/28/2010
2,461 Reputation
10 Guides authored
Badges:
31
+28 more badges
