Samsung Galaxy Camera Lens And Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

10

Time Required

                          10 - 15 minutes            

Sections

2

• Screen
• 6 steps
• Lens and Motherboard
• 4 steps

Flags

4

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung Galaxy Camera

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Screen               

• Begin removing the 3/16" screws for the device.

Begin removing the 3/16" screws for the device.

1024

Step 2

• Turn the device and remove the additional 3/16" screws.

Turn the device and remove the additional 3/16" screws.

Step 3

• Turn the device and remove the additional 3/16" screw.

Turn the device and remove the additional 3/16" screw.

Step 4

• Take the white cover plate off.

Take the white cover plate off.

Step 5

• Using the plastic opening tools, pry open the camera from the bottom.
• This may require a moderate use of force because of the sealing glue.

Using the plastic opening tools, pry open the camera from the bottom.

This may require a moderate use of force because of the sealing glue.

Step 6

• Gently pull the connector away from the motherboard.

Gently pull the connector away from the motherboard.

Step 7

              Lens and Motherboard               

• Unscrew the motherboard’s screws. There are 4 3/32" screws and 3 5/32" screws.

Unscrew the motherboard’s screws. There are 4 3/32" screws and 3 5/32" screws.

Step 8

• Unscrew the lens’ screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.

Unscrew the lens’ screws. There are 1 black 4/32" screw, 3 3/16" black screws, and 2 white 5/32" screws.

Step 9

• Pull these connectors away from motherboard.

Pull these connectors away from motherboard.

Step 10

• Lift the motherboard and lens out of the case.

Lift the motherboard and lens out of the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      10 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Richard Hicks                     

Member since: 01/13/2015

1,262 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       USF Tampa, Team 1-3, Sullivan Winter 2015                        

                                                  Member of USF Tampa, Team 1-3, Sullivan Winter 2015 



                    USFT-SULLIVAN-W15S1G3                     


                                            3 Members                     


                                            4 Guides authored                     

Sam - May 17, 2017

Reply

Hey mate, what do you do after the motherboard replacement? Just turn the camera on? Do you need to do a master reset?