Samsung Galaxy Centura Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          5 minutes            

Sections

2

• Battery
• 2 steps
• Screen
• 4 steps

Flags

0

• BackSamsung Galaxy Centura

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Locate the rectangular groove on the top side of the device.
• Firmly press the tip of your index finger, or plastic opening tool into the groove, and pull back firmly. The device should pop open as shown.

Locate the rectangular groove on the top side of the device.

Firmly press the tip of your index finger, or plastic opening tool into the groove, and pull back firmly. The device should pop open as shown.

1024

Step 2

• With the back casing removed, the phone should appear as shown, with a clear view of the battery.
• Gently pull the battery up with your thumb and index finger. It should come out without resistance.

With the back casing removed, the phone should appear as shown, with a clear view of the battery.

Gently pull the battery up with your thumb and index finger. It should come out without resistance.

Step 3

              Screen               

• Find the positions of the seven screws on the back of the device. Use the Phillips #00 screwdriver to remove these 5.0mm screws.

Find the positions of the seven screws on the back of the device. Use the Phillips #00 screwdriver to remove these 5.0mm screws.

Step 4

• Locate the indentation on the side of the device and gently insert the plastic opening tool into it. With a firm prying motion, the plastic should begin to come apart.
• Gently pull apart the plastic, and set it aside. The phone should now appear as shown in the second picture.

Locate the indentation on the side of the device and gently insert the plastic opening tool into it. With a firm prying motion, the plastic should begin to come apart.

Gently pull apart the plastic, and set it aside. The phone should now appear as shown in the second picture.

Step 5

• Pull back the clips located on the right hand side and the upper left side of the phone as shown.
• After releasing the clips, gently raise the motherboard, exposing the screen from the back.

Pull back the clips located on the right hand side and the upper left side of the phone as shown.

After releasing the clips, gently raise the motherboard, exposing the screen from the back.

Step 6

• Gently insert the metal spudger towards the top edge of the back side of the screen.
• Gently apply pressure to raise the screen from its held position. Continue pulling gently upwards from one side until the screen has been completely removed.

Gently insert the metal spudger towards the top edge of the back side of the screen.

Gently apply pressure to raise the screen from its held position. Continue pulling gently upwards from one side until the screen has been completely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Anthony Maldonado                     

Member since: 02/28/2017

110 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team S2-G5, Nance Spring 2017                        

                                                  Member of USF Tampa, Team S2-G5, Nance Spring 2017 



                    USFT-NANCE-S17S2G5                     


                                            3 Members                     


                                            5 Guides authored