Difficulty

Difficult

Steps

9

Time Required

                          15 minutes

Sections

2

  • Battery
  • 5 steps
  • Volume Button
  • 4 steps

Flags

0

  • BackSamsung Galaxy Core Prime

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Turn the smartphone off by using the power button on the right-hand side.

Turn the smartphone off by using the power button on the right-hand side.

1024

Step 2

  • Turn the smartphone over so that the rear camera is face up.

Turn the smartphone over so that the rear camera is face up.

Step 3

  • Use your fingernail or a flat tool to lift the back cover.

Use your fingernail or a flat tool to lift the back cover.

Step 4

  • Locate the battery near the bottom of the phone. The battery is square, flat, and is labeled ‘SAMSUNG’.

Locate the battery near the bottom of the phone. The battery is square, flat, and is labeled ‘SAMSUNG’.

Step 5

  • Use your fingernail or a flat tool to lift the battery out.

Use your fingernail or a flat tool to lift the battery out.

Step 6

              Volume Button
  • Use a Phillips #00 screwdriver to remove the eight 4mm screws from the midframe.

Use a Phillips #00 screwdriver to remove the eight 4mm screws from the midframe.

Step 7

  • Flip the phone over (screen up). Use an iOpener to heat the frame. Do this until the adhesive is loose.
  • Use care when handling these heating tools!

Flip the phone over (screen up). Use an iOpener to heat the frame. Do this until the adhesive is loose.

Use care when handling these heating tools!

Step 8

  • Use an iFixit Opening Tool or a similarly shaped tool like a guitar pick to lift the mid-frame.

Use an iFixit Opening Tool or a similarly shaped tool like a guitar pick to lift the mid-frame.

Step 9

  • Use tweezers to unhook both of the rubber fixtures holding the volume button to the frame.

Use tweezers to unhook both of the rubber fixtures holding the volume button to the frame.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Olivia Jensen

Member since: 10/02/2018

592 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Sam Houston State, Team S11-G2, Blackburne Fall 2018                        

                                                  Member of Sam Houston State, Team S11-G2, Blackburne Fall 2018 



                    SHSU-BLACKBURNE-F18S11G2                     


                                            4 Members                     


                                            5 Guides authored