Difficulty
Difficult
Steps
7
Time Required
15 - 20 minutes
Sections
3
- Battery
- 2 steps
- Screen
- 4 steps
- Back and Recent Apps Touch Sensor Button(s)
- 1 step
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackSamsung Galaxy Express 3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the indent area highlighted in red and use either your fingernail or a Prying Tool (such as a guitar pick) to separate the back from the body of the phone.
Locate the indent area highlighted in red and use either your fingernail or a Prying Tool (such as a guitar pick) to separate the back from the body of the phone.
1024
Step 2
- Once the cover is removed, locate the battery that reads “SAMSUNG.”
- Use either your fingernail or a Plastic Prying Tool (such as a guitar pick) to lift up the bottom indent of the battery.
- Do not use a metal tool, as it can cause injury.
Once the cover is removed, locate the battery that reads “SAMSUNG.”
Use either your fingernail or a Plastic Prying Tool (such as a guitar pick) to lift up the bottom indent of the battery.
Do not use a metal tool, as it can cause injury.
Step 3
Screen
- Use a Plastic Prying Tool (such as a spudger) to pop out piece shown.
Use a Plastic Prying Tool (such as a spudger) to pop out piece shown.
Step 4
- Detach the screen connector.
Detach the screen connector.
Step 5
- Use a blow dryer or heating pad to heat up the screen.
- Do not skip this step, as it may result in a broken screen and/or LCD.
- This step loosens the glue holding the screen in place.
Use a blow dryer or heating pad to heat up the screen.
Do not skip this step, as it may result in a broken screen and/or LCD.
This step loosens the glue holding the screen in place.
Step 6
- Use a Thin Plastic Tool (such as a guitar pick) or Plastic Prying Tool (such as a spudger) to lift out the glass digitizer and LCD screen around the edges.
- Do this slowly and carefully, as both parts can crack very easily.
- Ensure your tool is plastic, as a metal tool can damage the screen easily.
Use a Thin Plastic Tool (such as a guitar pick) or Plastic Prying Tool (such as a spudger) to lift out the glass digitizer and LCD screen around the edges.
Do this slowly and carefully, as both parts can crack very easily.
Ensure your tool is plastic, as a metal tool can damage the screen easily.
Step 7
Back and Recent Apps Touch Sensor Button(s)
- Use a plastic tool to remove back and/or recent tabs circuit buttons.
- Use a plastic tool as a metal tool can be dangerous to the phone or you.
Use a plastic tool to remove back and/or recent tabs circuit buttons.
Use a plastic tool as a metal tool can be dangerous to the phone or you.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Mack Johnson
Member since: 04/05/2018
984 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Linn Benton Community College, Team S2-G4, Johnson Spring 2018
Member of Linn Benton Community College, Team S2-G4, Johnson Spring 2018
LBCC-JOHNSON-S18S2G4
4 Members
7 Guides authored