Difficulty
Moderate
Steps
6
Time Required
5 - 15 minutes
Sections
1
- LCD Screen
- 6 steps
Flags
2
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Better Introduction
Improve this guide by completing or revising its introduction.
BackSamsung Galaxy Fame S6812i
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove the Battery Cover
- Locate the small indent in the top of the device and use your nails or the plastic opening tool to separate the cover from the mid-frame.
Locate the small indent in the top of the device and use your nails or the plastic opening tool to separate the cover from the mid-frame.
1024
Step 2
Remove the Battery
- Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device.
Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device.
Step 3
Remove the Mid-Frame
- Remove the five 3mm screws along the top and bottom edges of the device with the Philips #00 screwdriver.
- One of these will be hidden under a piece of reflective foil. Breaking this will void the warranty.
- Use the plastic removal tool to work pry the mid-frame from the device.
- This may take some effort, so try working around the edges slowly as to not break anything.
Remove the five 3mm screws along the top and bottom edges of the device with the Philips #00 screwdriver.
One of these will be hidden under a piece of reflective foil. Breaking this will void the warranty.
Use the plastic removal tool to work pry the mid-frame from the device.
This may take some effort, so try working around the edges slowly as to not break anything.
Step 4
Unplug LCD Screen from the Motherboard
- Carefully use the pointed end of the spudger to disconnect the ribbon connections on the motherboard.
Carefully use the pointed end of the spudger to disconnect the ribbon connections on the motherboard.
Step 5
Remove the Motherboard
- Wedge the plastic opening tool between the motherboard and front plate to dismount the motherboard and chassis from the front plate of the phone.
Wedge the plastic opening tool between the motherboard and front plate to dismount the motherboard and chassis from the front plate of the phone.
Step 6
Remove Damaged LCD Screen
- Use one side of the tweezers to pry the LCD off of the front plate of the phone.
- Work in a clean environment and do not touch the inside of the plastic screen cover or the face of the new LCD Screen. These cannot be cleaned once the device is reassembled.
Use one side of the tweezers to pry the LCD off of the front plate of the phone.
Work in a clean environment and do not touch the inside of the plastic screen cover or the face of the new LCD Screen. These cannot be cleaned once the device is reassembled.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 1 other contributor
Taylor
Member since: 01/30/2015
1,165 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 16-6, Watkins Winter 2015
Member of USF Tampa, Team 16-6, Watkins Winter 2015
USFT-WATKINS-W15S16G6
2 Members
5 Guides authored
