Difficulty

Moderate

Steps

5

Time Required

                          6 minutes

Sections

2

  • Display Housing
  • 3 steps
  • Band
  • 2 steps

Flags

0

  • BackSamsung Galaxy Gear

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Display Housing
  • Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.
  • Be sure your device is turned off.

Use a T5 Torx screwdriver to remove the four 4.0 mm screws on the back of the device.

Be sure your device is turned off.

1024

Step 2

  • Use a plastic opening tool to separate the display housing from from the device.
  • To ensure you don’t damage your device, insert the opening tool and slide it the entire length of the gap on both sides of the device.

Use a plastic opening tool to separate the display housing from from the device.

To ensure you don’t damage your device, insert the opening tool and slide it the entire length of the gap on both sides of the device.

Step 3

  • Gently pry back the metal flap on top of the connector.
  • Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.

Gently pry back the metal flap on top of the connector.

Locate the two 2.0 mm black screws and unscrew using a Phillips PH00 bit. The connector will detach from the device.

Step 4

              Band
  • Loosen the camera ribbon so it will easily pass through the watch body.

Loosen the camera ribbon so it will easily pass through the watch body.

Step 5

  • Grip the body of the watch and pull the band upward.
  • Do the same with the adjacent band, but there will be no camera ribbon to pass through the watch body.

Grip the body of the watch and pull the band upward.

Do the same with the adjacent band, but there will be no camera ribbon to pass through the watch body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.

Author

                                      with 3 other contributors 


                    Dalt Lasell

Member since: 04/12/2016

515 Reputation

                                      2 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       Cal Poly, Team 1-9, Maness Spring 2016                        

                                                  Member of Cal Poly, Team 1-9, Maness Spring 2016 



                    CPSU-MANESS-S16S1G9                     


                                            4 Members                     


                                            6 Guides authored

Naji Ajaleel Ibrahim - Jul 2, 2016

Reply

I have the non camera band (the one with holes )to be changed only. …. but I don’t know where to buy it from and how to make sure that it will be the right one for this model SM- v700

Naji

Is there a shop in London where I can have this Band changed and repaired by themselves ?

Roger Palmer - Mar 12, 2017

Reply

Absolutely brilliant instructions. Many thanks.

On mine two of the screws were T5 Torx and the other two were T6 Torx, so something to look for.

Mehboob Mehmood - Feb 24, 2018

Reply

Please advise are you able to ship to Pakistan

Dan Bloch - Jul 15, 2019

Reply

These are very helpful but could do with one more step and pic at the end - for how to swap out the embedded camera.