Samsung Galaxy Grand Neo Plus Touch Screen Digitizer Glass Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Touch screen Digitizer Glass
10 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

BackSamsung Galaxy Grand Neo Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Video Overview

Step 1

              SIM and Memory Cards

This is Samsung Galaxy Grand Neo Plus i9060i with broken screen.
Remove the battery and any installed SIM and memory cards.

This is Samsung Galaxy Grand Neo Plus i9060i with broken screen.

Remove the battery and any installed SIM and memory cards.

1024

Step 2

              Rear Cover 1

There are 12x small Phillips screws, remove them.
With a plastic tool start the disassembling from the bottom side.
You can use more then one plastic tool.

There are 12x small Phillips screws, remove them.

With a plastic tool start the disassembling from the bottom side.

You can use more then one plastic tool.

Step 3

              Rear Cover 2

The rear bezel is locked to the frame near to the battery connector. Use a tool with a sharp tip and unhook it.
Now you can separate the rear bezel.
This is the Loudspeaker (in case if you want to change it).

The rear bezel is locked to the frame near to the battery connector. Use a tool with a sharp tip and unhook it.

Now you can separate the rear bezel.

This is the Loudspeaker (in case if you want to change it).

Step 4

              Logic Board

Remove one Phillips screw.
Disconnect:
Vloume UP/DWN buttons flex cable and Power ON button flex cable.
LCD flex cable
Front camera
Audio jack flex cable
Now gently remove the logic board.

Remove one Phillips screw.

Disconnect:

Vloume UP/DWN buttons flex cable and Power ON button flex cable.

LCD flex cable

Front camera

Audio jack flex cable

Now gently remove the logic board.

Step 5

              Front Camera

Remove the front camera.
Disconnect the touchscreen flex cable and unstuck it from the middle frame.

Remove the front camera.

Disconnect the touchscreen flex cable and unstuck it from the middle frame.

Step 6

              Touch Screen Removal - Part 1

At the bottom side, under the touch screen glass is the menu buttons flex cable. Be careful for it when you separating the glass from the frame.
Warm the glass. This will soften the adhesive tape. You can use hot air gun or hair dryer.
With a plastic tool start the separation at the upper side.

At the bottom side, under the touch screen glass is the menu buttons flex cable. Be careful for it when you separating the glass from the frame.

Warm the glass. This will soften the adhesive tape. You can use hot air gun or hair dryer.

With a plastic tool start the separation at the upper side.

Step 7

              Touch Screen Removal - Part 2

You can warm the glass again to separate the glass easier.
Gently unstuck the menu buttons flex cable and remove the glass.

You can warm the glass again to separate the glass easier.

Gently unstuck the menu buttons flex cable and remove the glass.

Step 8

              Cleaning

There is a small plate in the touch screen flex cable slot. Remove it to allow the flex cable of the new touch screen to pass.
Remove the remnants of the adhesive sticker and clean the LCD.

There is a small plate in the touch screen flex cable slot. Remove it to allow the flex cable of the new touch screen to pass.

Remove the remnants of the adhesive sticker and clean the LCD.

Step 9

              Installation of the new Touch Screen

Install the new touch screen and start with the reassembling.

Install the new touch screen and start with the reassembling.

Step 10

That’s all. Thanks!

That’s all. Thanks!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      29 other people completed this guide.

Author

                                      with 1 other contributor

                    ZFix

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored

Pravesh - Oct 28, 2016

very much helpful..this guide saved my repairing charge…this page is awesome..

Member-Contributed Guide#

Introduction#

What you need#

Video Overview#

Team#

Member-Contributed Guide

Introduction

What you need

Video Overview

Team