Difficulty

Moderate

Steps

7

Time Required

                          15 minutes

Sections

3

  • Battery
  • 2 steps
  • Midframe
  • 3 steps
  • Earpiece Speaker
  • 2 steps

Flags

0

  • BackSamsung Galaxy Grand Prime

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Remove the back cover of phone by lifting up on the back cover tab with the blue plastic opening tool.
  • Go around the edge of the back cover to completely remove it.

Remove the back cover of phone by lifting up on the back cover tab with the blue plastic opening tool.

Go around the edge of the back cover to completely remove it.

1024

Step 2

              Remove the battery.
  • Remove the old battery by lifting up on the thumb tab.
  • Periodically clean the brass terminals on the battery and the phone. Place a minute amount of ISO on a Q-tip and gingerly clean the connections.

Remove the old battery by lifting up on the thumb tab.

Periodically clean the brass terminals on the battery and the phone. Place a minute amount of ISO on a Q-tip and gingerly clean the connections.

Step 3

              Midframe
  • Remove the nine 4mm screws screws from the midframe with a Phillips #000 screwdriver.

Remove the nine 4mm screws screws from the midframe with a Phillips #000 screwdriver.

Step 4

  • Wedge the blue plastic opening tool in between the front and side panel.
  • Move the blue plastic opening tool around the edges between the front and side panel.

Wedge the blue plastic opening tool in between the front and side panel.

Move the blue plastic opening tool around the edges between the front and side panel.

Step 5

  • Make sure that you detach the mid-frame from the inside too.

Make sure that you detach the mid-frame from the inside too.

Step 6

              Earpiece Speaker
  • Use the plastic opening tool to unhook the ribbon cable clip.

Use the plastic opening tool to unhook the ribbon cable clip.

Step 7

  • Gently pull on the connector with the tweezers until the speaker comes off.

Gently pull on the connector with the tweezers until the speaker comes off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      20 other people completed this guide.

Author

                                      with 1 other contributor 


                    Kyle Ruff

Member since: 02/04/2016

6,461 Reputation

                                      5 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       USF Tampa, Team 17-3, Blackwell Winter 2016                        

                                                  Member of USF Tampa, Team 17-3, Blackwell Winter 2016 



                    USFT-BLACKWELL-W16S17G3                     


                                            3 Members                     


                                            6 Guides authored