Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
2
- Midframe
- 4 steps
- Glass Screen
- 3 steps
Flags
0
BackSamsung Galaxy J1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Midframe
- Insert a finger nail or plastic opening tool between the back cover and the device.
- Gently pry the rear cover off of the back of the phone.
Insert a finger nail or plastic opening tool between the back cover and the device.
Gently pry the rear cover off of the back of the phone.
1024
Step 2
- Using a finger, pull the SIM card down out of its slot.
- Remove the SIM card.
- The pictured device is missing the SIM card and battery.
Using a finger, pull the SIM card down out of its slot.
Remove the SIM card.
The pictured device is missing the SIM card and battery.
Step 3
- Using a Phillips #00 screwdriver remove the eleven 3 mm screws.
Using a Phillips #00 screwdriver remove the eleven 3 mm screws.
Step 4
- Insert a plastic opening tool between the screen and the back of the device.
- Starting at the bottom of the device, gently slide the tool along the edges of the screen.
- Gently pry the main assembly from the midframe of the device.
- When removing the main assembly, pry gently so as to not crack the glass screen or break any clips within the device.
Insert a plastic opening tool between the screen and the back of the device.
Starting at the bottom of the device, gently slide the tool along the edges of the screen.
Gently pry the main assembly from the midframe of the device.
When removing the main assembly, pry gently so as to not crack the glass screen or break any clips within the device.
Step 5
Glass Screen
- Using the flat end of a spudger, disconnect the digitizer cable connector.
Using the flat end of a spudger, disconnect the digitizer cable connector.
Step 6
- Using a plastic opening tool pry between silver digitizer and black back piece.
- Slowly slide plastic opening tool around the screen to loosen the adhesive.
- Be careful not to tear the digitizer cable when threading it through the plastic housing.
Using a plastic opening tool pry between silver digitizer and black back piece.
Slowly slide plastic opening tool around the screen to loosen the adhesive.
Be careful not to tear the digitizer cable when threading it through the plastic housing.
Step 7
- Carefully separate display assembly from the plastic housing.
Carefully separate display assembly from the plastic housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
15 other people completed this guide.
Author
with 2 other contributors
Sean Kramer
Member since: 02/14/2018
1,335 Reputation
6 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team S5-G4, Eyestone Spring 2018
Member of USF Tampa, Team S5-G4, Eyestone Spring 2018
USFT-EYESTONE-S18S5G4
3 Members
6 Guides authored
Solaimalai - Aug 12, 2019
Reply
In my Samsung J110h, Some of the right side keys in keyboard not working. They are P, Zero, In message screen, the sending button etc..
I am in desperate need for advice to rectify.
Will somebody help me.
My mail Id”: karupusolai@gmail.com
harshithaemazel - Jan 27, 2022
Reply
I was having the display issue. So I bought Samsung Galaxy J1 Screen replacement. And, I replaced it by myself using the information in this.