Difficulty
Moderate
Steps
7
Time Required
10 - 15 minutes
Sections
6
- Back Cover
- 1 step
- Battery
- 1 step
- SD and SIM Cards
- 1 step
- Screen
- 1 step
- Midframe
- 2 steps
- Motherboard
- 1 step
Flags
2
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Missed a Step
Oops! This guide is currently missing some important steps.
BackSamsung Galaxy J3 Mission
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover
- Insert your fingernail into the back cover removal slot and gently pull back until the cover pops off.
Insert your fingernail into the back cover removal slot and gently pull back until the cover pops off.
1024
Step 2
Battery
- Make sure that your device is powered off before removing the battery.
- Insert your fingernail into the battery removal slot and pull back until the battery pops out.
Make sure that your device is powered off before removing the battery.
Insert your fingernail into the battery removal slot and pull back until the battery pops out.
Step 3
SD and SIM Cards
- Use your finger to slide the SD and SIM card out of the device.
Use your finger to slide the SD and SIM card out of the device.
Step 4
Screen
- Use an iFixit opening tool to lift the screen from one of the vertical sides of the phone and continue gently prying until the screen is loose enough to safely remove.
- The damaged screen is connected under the screen assembly with a small plastic brace; remove this with an iFixit opening tool.
- Be careful around the home button. It has little tabs to keep it in the frame, but they will break if the adhesive isn’t loosened with age or heat.
Use an iFixit opening tool to lift the screen from one of the vertical sides of the phone and continue gently prying until the screen is loose enough to safely remove.
The damaged screen is connected under the screen assembly with a small plastic brace; remove this with an iFixit opening tool.
Be careful around the home button. It has little tabs to keep it in the frame, but they will break if the adhesive isn’t loosened with age or heat.
Step 5
Midframe
- Using a Phillips #000 screwdriver, remove all eleven 5mm screws from the metal panel.
Using a Phillips #000 screwdriver, remove all eleven 5mm screws from the metal panel.
Step 6
- Turn the device over, and push firmly to separate the metal plate from the back paneling.
Turn the device over, and push firmly to separate the metal plate from the back paneling.
Step 7
Motherboard
- Carefully lift up the motherboard with your finger starting from the bottom up
- Motherboard is fragile.
Carefully lift up the motherboard with your finger starting from the bottom up
Motherboard is fragile.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 2 other contributors
Joseph Toth
Member since: 09/21/2018
680 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
University of North Texas, Team S5-G1, Thompson Fall 2018
Member of University of North Texas, Team S5-G1, Thompson Fall 2018
UNT-THOMPSON-F18S5G1
4 Members
6 Guides authored