Samsung Galaxy J3 Mission Screen Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          5 - 10 minutes            

Sections

• Back Cover
• 1 step
• Battery
• 1 step
• Screen
• 1 step

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

• BackSamsung Galaxy J3 Mission

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Cover               

• Insert your fingernail into the back cover removal slot and gently pull back until the cover pops off.

Insert your fingernail into the back cover removal slot and gently pull back until the cover pops off.

1024

Step 2

              Battery               

• Make sure that your device is powered off before removing the battery.
• Insert your fingernail into the battery removal slot and pull back until the battery pops out.

Make sure that your device is powered off before removing the battery.

Insert your fingernail into the battery removal slot and pull back until the battery pops out.

Step 3

              Screen               

• Use an iFixit opening tool to lift the screen from one of the vertical sides of the phone and continue gently prying until the screen is loose enough to safely remove.
• The damaged screen is connected under the screen assembly with a small plastic brace; remove this with an iFixit opening tool.
• Be careful around the home button. It has little tabs to keep it in the frame, but they will break if the adhesive isn’t loosened with age or heat.

Use an iFixit opening tool to lift the screen from one of the vertical sides of the phone and continue gently prying until the screen is loose enough to safely remove.

The damaged screen is connected under the screen assembly with a small plastic brace; remove this with an iFixit opening tool.

Be careful around the home button. It has little tabs to keep it in the frame, but they will break if the adhesive isn’t loosened with age or heat.

To install a new screen try the connector before adding any adhesive, then put it back together by following these steps in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Joseph Toth                     

Member since: 09/21/2018

680 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       University of North Texas, Team S5-G1, Thompson Fall 2018                        

                                                  Member of University of North Texas, Team S5-G1, Thompson Fall 2018 



                    UNT-THOMPSON-F18S5G1                     


                                            4 Members                     


                                            6 Guides authored