Difficulty
Moderate
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Headphone Jack
- 4 steps
Flags
0
BackSamsung Galaxy J3V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Headphone Jack
- Place your thumb on the top left corner and pry the tab open and lift off the back cover.
Place your thumb on the top left corner and pry the tab open and lift off the back cover.
1024
Step 2
- Remove the ten 2.0 mm screws with the Phillips #J000 screwdriver.
Remove the ten 2.0 mm screws with the Phillips #J000 screwdriver.
Step 3
- Use a small suction cup to pull the screen up. Then slip a small plastic opening tool under the screen to pry it upwards.
- If this is the first time the screen is being removed then there will be adhesive around the edges of the screen. It may be difficult to remove the screen because of this adhesive seal and it is going to take a few tries and some force to pry the entire screen off.
Use a small suction cup to pull the screen up. Then slip a small plastic opening tool under the screen to pry it upwards.
If this is the first time the screen is being removed then there will be adhesive around the edges of the screen. It may be difficult to remove the screen because of this adhesive seal and it is going to take a few tries and some force to pry the entire screen off.
Step 4
- Remove connector tab with spudger then carefully remove headphone jack with tweezers.
Remove connector tab with spudger then carefully remove headphone jack with tweezers.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Carry Corrales
Member since: 09/28/2017
738 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team S3-G3, Nance Fall 2017
Member of USF Tampa, Team S3-G3, Nance Fall 2017
USFT-NANCE-F17S3G3
4 Members
5 Guides authored