Difficulty
Moderate
Steps
3
Time Required
30 minutes
Sections
1
- Display
- 3 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSamsung Galaxy J6
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Cut the screen adhesive
- I recommend wearing eye protection to avoid any inconvenience with glass fragments.
- It is very important to heat the display on the side parts where the double-sided adhesive is well with a hairdryer or other so as to make it lose its adhesion and facilitate the operation of inserting the blade to lift it.
- Insert the blade between the body and the glass and begin to separate the display from the body, I recommend starting from the top paying attention.
- The flat connection connectors are located at the bottom.
I recommend wearing eye protection to avoid any inconvenience with glass fragments.
It is very important to heat the display on the side parts where the double-sided adhesive is well with a hairdryer or other so as to make it lose its adhesion and facilitate the operation of inserting the blade to lift it.
Insert the blade between the body and the glass and begin to separate the display from the body, I recommend starting from the top paying attention.
The flat connection connectors are located at the bottom.
1024
Step 2
Lift up the display
- Lift the display.
Lift the display.
Step 3
Remove the display
- Unplug the black plastic plug securing the display connector.
- Unhook the display connector.
- Remove the old display and place the new display.
- Put some glue to attach the new display.
Unplug the black plastic plug securing the display connector.
Unhook the display connector.
Remove the old display and place the new display.
Put some glue to attach the new display.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
33 other people completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
shingle
albertob
Brad Harmening
Chuck Taylor
and 6 others…
+6
Author
with 3 other contributors
Smilzo
Member since: 11/09/2013
10,473 Reputation
39 Guides authored
Badges:
23
+20 more badges
NoCheatImPGM - Sep 16, 2019
Reply
f**k this adhesive!!
Thanks for this tutorial :)
Smilzo - Sep 16, 2019
Gli adesivi non aderiscono bene sono d’accordo,puoi provare con altro biadesivo 3M oppure con della colla idonea.
Dot - Sep 25, 2019
Reply
You mentioned nothing about disconnecting the battery. If the phone accidentally turns on in the middle of a display swap [with no way to turn it off, since there’s no display or digitser connected] you will blow an internal fuse, rendering the phone useless. Complete waste of time! You should have included that the battery be disconnected before attempting this.
Smilzo - Sep 25, 2019
Ciao ti ringrazio per la Puntualizzazione ed il buon consiglio.
io non ho mai avuto problemi nello scollegare i display perché il telefono è precedentemente spento e rimane spento fino a quando non scollego il connettore display.
se per sfortuna si dovesse toccare il tasto power (che comunque richiede una lunga pressione e non un semplice tocco ) si vedrebbe accendere il display o vibrare il telefono o accendersi i led. Quindi prima di scollegare lo spegnerei nuovamente.
non vedo il problema.
scollegare la batteria comporta una procedura analoga a togliere il display e quindi molto tempo in più ed accollarsi i rischi di rompere un componente posteriore per rimuoverlo,perdendo così impermeabilità se non si dispone di adesivo specifico per questa sostituzione.
Danilo B. - Apr 13, 2020
Reply
Ciao e grazie della guida.
Quale modello di display e su quale sito consigli di comprarlo?
