Samsung Galaxy Light Earpiece Speaker Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

• Battery
• 2 steps
• Motherboard
• 3 steps
• Earpiece Speaker
• 1 step

Flags

0

• BackSamsung Galaxy Light

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Remove Back Cover               

• Before removing the back cover, make sure the Samsung Galaxy Light is completely off.
• Using a plastic opening tool (or your fingernails), pry up the back cover of the device.
• Remove the back cover.

Before removing the back cover, make sure the Samsung Galaxy Light is completely off.

Using a plastic opening tool (or your fingernails), pry up the back cover of the device.

Remove the back cover.

1024

Step 2

              Remove Battery               

• Remove the battery from the device.

Remove the battery from the device.

Step 3

              Unscrew Midframe               

• Using a Phillips #0 screwdriver, remove all nine (9) screws attaching the midframe to the front of the device.

Using a Phillips #0 screwdriver, remove all nine (9) screws attaching the midframe to the front of the device.

Step 4

              Remove Midframe               

• Using the plastic opening tool, separate the midframe from the front panel of the device.
• Remove the midframe.

Using the plastic opening tool, separate the midframe from the front panel of the device.

Remove the midframe.

Step 5

              Detach Motherboard               

• To detach the motherboard from the device:
• Using the plastic opening tool, carefully pry up the digitizer connector from the motherboard.
• Carefully lift the motherboard up and move it toward the left side of the device.
• Using the plastic opening tool, carefully pry up the display connector on the back side of the motherboard.

To detach the motherboard from the device:

Using the plastic opening tool, carefully pry up the digitizer connector from the motherboard.

Carefully lift the motherboard up and move it toward the left side of the device.

Using the plastic opening tool, carefully pry up the display connector on the back side of the motherboard.

Step 6

              Removing the audio and vibrator               

• Use a plastic opening tool to pry up the headphone jack, vibrator, and earpiece speaker assembly.

Use a plastic opening tool to pry up the headphone jack, vibrator, and earpiece speaker assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Paul Goyette                     

Member since: 10/21/2014

436 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       UMass Dartmouth, Team 5-2, Vijaybhaskar Fall 2014                        

                                                  Member of UMass Dartmouth, Team 5-2, Vijaybhaskar Fall 2014 



                    UMASSD-VIJAYBHASKAR-F14S5G2                     


                                            3 Members                     


                                            5 Guides authored