Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Motherboard
  • 3 steps
  • Rear Facing Camera
  • 1 step

Flags

0

  • BackSamsung Galaxy Light

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove Back Cover
  • Before removing the back cover, make sure the Samsung Galaxy Light is completely off.
  • Using a plastic opening tool (or your fingernails), pry up the back cover of the device.
  • Remove the back cover.

Before removing the back cover, make sure the Samsung Galaxy Light is completely off.

Using a plastic opening tool (or your fingernails), pry up the back cover of the device.

Remove the back cover.

1024

Step 2

              Remove Battery
  • Remove the battery from the device.

Remove the battery from the device.

Step 3

              Unscrew Midframe
  • Using a Phillips #0 screwdriver, remove all nine (9) screws attaching the midframe to the front of the device.

Using a Phillips #0 screwdriver, remove all nine (9) screws attaching the midframe to the front of the device.

Step 4

              Remove Midframe
  • Using the plastic opening tool, separate the midframe from the front panel of the device.
  • Remove the midframe.

Using the plastic opening tool, separate the midframe from the front panel of the device.

Remove the midframe.

Step 5

              Detach Motherboard
  • To detach the motherboard from the device:
  • Using the plastic opening tool, carefully pry up the digitizer connector from the motherboard.
  • Carefully lift the motherboard up and move it toward the left side of the device.
  • Using the plastic opening tool, carefully pry up the display connector on the back side of the motherboard.

To detach the motherboard from the device:

Using the plastic opening tool, carefully pry up the digitizer connector from the motherboard.

Carefully lift the motherboard up and move it toward the left side of the device.

Using the plastic opening tool, carefully pry up the display connector on the back side of the motherboard.

Step 6

              Rear Facing Camera
  • Use a plastic opening tool to disconnect the rear facing camera from the motherboard.

Use a plastic opening tool to disconnect the rear facing camera from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                    Geoff Wacker

Member since: 09/30/2013

87,540 Reputation

                                      89 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges