Samsung Galaxy Luna Screen Replacement Repair Guide

Difficulty

Moderate

Steps

2

Time Required

                          10 - 15 minutes            

Sections

1

• Screen
• 2 steps

Flags

0

• BackSamsung Galaxy Luna

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Place small suction cup on the center of screen and press firmly.
• Hold the back of the phone and pull on the suction cup gently until the screen begins to bend.

Place small suction cup on the center of screen and press firmly.

Hold the back of the phone and pull on the suction cup gently until the screen begins to bend.

1024

Step 2

• Insert the small metal spudger into an opening on the phone and pry off the screen.
• Be careful not to tear any exposed circuits as the screen is being removed.
• Make sure the screen is completely detached from the motherboard before removing it.

Insert the small metal spudger into an opening on the phone and pry off the screen.

Be careful not to tear any exposed circuits as the screen is being removed.

Make sure the screen is completely detached from the motherboard before removing it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Daniel Rocchi                     

Member since: 02/14/2018

214 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       USF Tampa, Team S6-G1, Eyestone Spring 2018                        

                                                  Member of USF Tampa, Team S6-G1, Eyestone Spring 2018 



                    USFT-EYESTONE-S18S6G1                     


                                            4 Members                     


                                            5 Guides authored                     

KEAHI BAILEY - Oct 30, 2018

Reply

yeah, i tried it. It ended up just cracking the screen a lot. It also never worked for me.

bikergirl1993 - Sep 13, 2019

Reply

I don’t have a handle for the suction. But I don’t have a metal spudger set either, is there anything else that I can use in place of the metal spudger?

RatobasheR Electronics - Feb 23, 2020

Reply

Where can I buy the replacement screen? It’s not for sale in the iFixit shop…