Difficulty
Moderate
Steps
5
Time Required
20 minutes
Sections
1
- Rear Camera
- 5 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackSamsung Galaxy Mega 2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Camera
- Before beginning, make sure phone is turned off.
- On the back of the phone, find the slot at the charging port located at the bottom of the phone.
- Either insert the plastic opening tool or use your fingernail to pull up on the back cover.
- Once the corner is released, slide your finger around the outside until the back cover releases.
Before beginning, make sure phone is turned off.
On the back of the phone, find the slot at the charging port located at the bottom of the phone.
Either insert the plastic opening tool or use your fingernail to pull up on the back cover.
Once the corner is released, slide your finger around the outside until the back cover releases.
1024
Step 2
- Locate the battery.
- Insert fingernail or plastic opening tool into the slot on the bottom of the battery and gently lift up.
- Remove the battery.
Locate the battery.
Insert fingernail or plastic opening tool into the slot on the bottom of the battery and gently lift up.
Remove the battery.
Step 3
- Use phillips head PH000 and remove all 13, 1.4 mm visible screws.
- Using the pry tool, carefully pop the Digitizer cover off the device.
- Use pry tool to disconnect the digitizer.
Use phillips head PH000 and remove all 13, 1.4 mm visible screws.
Using the pry tool, carefully pop the Digitizer cover off the device.
Use pry tool to disconnect the digitizer.
Step 4
- Insert the pry tool along the side of the device, then work your way around the borders of the screen, separating the screen from the rear assembling frame.
- Remember once the screen is off to completely remove it from the mid-frame.
- To remove the mid-frame from the motherboard, press down on the top right corner of the frame and the mid-frame should release from the motherboard.
- When it releases use tweezers to pick up on the mid-frame to completely separate it from the motherboard.
Insert the pry tool along the side of the device, then work your way around the borders of the screen, separating the screen from the rear assembling frame.
Remember once the screen is off to completely remove it from the mid-frame.
To remove the mid-frame from the motherboard, press down on the top right corner of the frame and the mid-frame should release from the motherboard.
When it releases use tweezers to pick up on the mid-frame to completely separate it from the motherboard.
Step 5
- Once the rear assembly frame is removed you will see the motherboard and the connectors.
- Locate the rear facing camera in the top middle of the phone.
- Using tweezers lift up on the motherboard itself to disconnect it from the mid-frame.
- Flip the motherboard over.
- Use the tweezers to then disconnect the rear facing camera.
Once the rear assembly frame is removed you will see the motherboard and the connectors.
Locate the rear facing camera in the top middle of the phone.
Using tweezers lift up on the motherboard itself to disconnect it from the mid-frame.
Flip the motherboard over.
Use the tweezers to then disconnect the rear facing camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Taylor Powell
Member since: 09/08/2017
699 Reputation
5 Guides authored
Badges:
10
+7 more badges
Team
Western Carolina University, Team S1-G6, Virtue Fall 2017
Member of Western Carolina University, Team S1-G6, Virtue Fall 2017
WCU-VIRTUE-F17S1G6
4 Members
5 Guides authored
