Difficulty
Moderate
Steps
7
Time Required
5 - 10 minutes
Sections
3
- Battery
- 2 steps
- Midframe
- 2 steps
- Earpiece Speaker/LED Indicator
- 3 steps
Flags
0
BackSamsung Galaxy Mega
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Before starting, ensure device is completely turned off.
- On the back of phone, locate the slot on the top left corner.
- Insert plastic opening tool or fingernail and pull up on the back plate.
- With the corner released, slide your finger around the device between the back plate and the phone to release connectors.
Before starting, ensure device is completely turned off.
On the back of phone, locate the slot on the top left corner.
Insert plastic opening tool or fingernail and pull up on the back plate.
With the corner released, slide your finger around the device between the back plate and the phone to release connectors.
1024
Step 2
- Insert fingernail into the slot on bottom of battery and gently pull up.
- Remove the battery.
Insert fingernail into the slot on bottom of battery and gently pull up.
Remove the battery.
Step 3
Midframe
- Remove the 14 3.45 mm Phillips #000 screws from the assembly.
- Gently, insert plastic opening tool into seam above the volume buttons of your phone.
- You may substitute metal spudger for plastic opening tool to first start the opening of the seam. This may cause exterior cosmetic damage.
Remove the 14 3.45 mm Phillips #000 screws from the assembly.
Gently, insert plastic opening tool into seam above the volume buttons of your phone.
You may substitute metal spudger for plastic opening tool to first start the opening of the seam. This may cause exterior cosmetic damage.
Step 4
- Slowly slide plastic opening tool around the device to release all the connectors internal to the device.
- The device should easily come apart after the plastic opening tool is slid around the entire device.
- During reassembly, ensure volume and power buttons align properly.
Slowly slide plastic opening tool around the device to release all the connectors internal to the device.
The device should easily come apart after the plastic opening tool is slid around the entire device.
During reassembly, ensure volume and power buttons align properly.
Step 5
Earpiece Speaker/LED Indicator
- Remove the black 2.55 mm Phillips #000 screw.
Remove the black 2.55 mm Phillips #000 screw.
Step 6
- Remove the metal cover with the plastic opening tool.
Remove the metal cover with the plastic opening tool.
Step 7
- Remove the motherboard clip from speaker assembly to the motherboard.
- Gently lift the speaker and LED assembly out of the device.
- Speaker assembly may be glued to the device, gently pry until it releases.
Remove the motherboard clip from speaker assembly to the motherboard.
Gently lift the speaker and LED assembly out of the device.
Speaker assembly may be glued to the device, gently pry until it releases.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 3 other contributors
Max Rathman
Member since: 02/04/2016
861 Reputation
4 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 17-2, Blackwell Winter 2016
Member of USF Tampa, Team 17-2, Blackwell Winter 2016
USFT-BLACKWELL-W16S17G2
4 Members
8 Guides authored
