Samsung Galaxy Note 10 1 2014 Battery Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Case
1 step
Battery
3 steps

Flags

BackSamsung Galaxy Note 10.1 (2014)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Case

Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.
If possible, consider using the black nylon spudger for a gentler separation.

Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.

If possible, consider using the black nylon spudger for a gentler separation.

1024

Step 2

              Battery

Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.
Gently pull the ribbon tape on the battery away from the bar. Repeat this process for the second ribbon tape.

Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.

Gently pull the ribbon tape on the battery away from the bar. Repeat this process for the second ribbon tape.

Step 3

Remove the six 3mm screws around the battery with the Phillips PH000 screwdriver.

Remove the six 3mm screws around the battery with the Phillips PH000 screwdriver.

Step 4

Lift up the battery from the bottom and situate the black nylon spudger underneath the battery.
Use the black nylon spudger to disconnect the multi-colored wires from the rest of the device.

Lift up the battery from the bottom and situate the black nylon spudger underneath the battery.

Use the black nylon spudger to disconnect the multi-colored wires from the rest of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      26 other people completed this guide.

Author

                                      with 2 other contributors

                    Joseph Rasico

Member since: 02/20/2017

2,160 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S1-G6, Leahy Spring 2017                        

                                                  Member of USF Tampa, Team S1-G6, Leahy Spring 2017 



                    USFT-LEAHY-S17S1G6                     


                                            3 Members                     


                                            6 Guides authored

prisca - Sep 20, 2017

Step 1 you have to show the back cover to remove. Showing the front side is confusing.

After step 4 there should be a step 5 to show how to disconnect the white connector with the colored wires: it took time to discover that you have to lift the 2 side clips, and not to pull…

Matt - Mar 24, 2018

Just followed your instructions. Used a online kit with a guitar pick-like spudger. Had to wrestle with it slightly, but everything worked out perfectly to your instructions.

Eramur - Oct 9, 2018

Followed the instructions. Worked nearly perfectly. The last step is a bit tricky. Just look at the new battery to understand the system.

Bradley Carr - Dec 29, 2020

Something I won’t be doing again. It was very annoying to do and nerve racking to complete. Was a pain to snap back together.

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team