Samsung Galaxy Note 10 1 2014 Loudspeaker Modules Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Case
1 step
Loudspeaker Modules
3 steps

Flags

BackSamsung Galaxy Note 10.1 (2014)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Case

Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.
If possible, consider using the black nylon spudger for a gentler separation.

Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.

If possible, consider using the black nylon spudger for a gentler separation.

1024

Step 2

              Loudspeaker Modules

Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.
Remove the one 3mm screw on the top left side of the device with the same method.

Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.

Remove the one 3mm screw on the top left side of the device with the same method.

Step 3

              loudspeaker  - remove right speaker

Remove the gray rubber piece.
Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard.
Remove the right speaker unit.

Remove the gray rubber piece.

Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard.

Remove the right speaker unit.

Step 4

Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger.
They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.

Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger.

They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 5 other contributors

                    Joseph Rasico

Member since: 02/20/2017

2,160 Reputation

                                      6 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team S1-G6, Leahy Spring 2017                        

                                                  Member of USF Tampa, Team S1-G6, Leahy Spring 2017 



                    USFT-LEAHY-S17S1G6                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team