Difficulty
Moderate
Steps
10
Time Required
25 minutes
Sections
5
- Case
- 1 step
- Loudspeaker Modules
- 3 steps
- Battery
- 3 steps
- Motherboard
- 2 steps
- Rear Camera
- 1 step
Flags
1
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
BackSamsung Galaxy Note 10.1 (2014)
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Case
- Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.
- If possible, consider using the black nylon spudger for a gentler separation.
Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.
If possible, consider using the black nylon spudger for a gentler separation.
1024
Step 2
Loudspeaker Modules
- Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.
- Remove the one 3mm screw on the top left side of the device with the same method.
Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.
Remove the one 3mm screw on the top left side of the device with the same method.
Step 3
loudspeaker - remove right speaker
- Remove the gray rubber piece.
- Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard.
- Remove the right speaker unit.
Remove the gray rubber piece.
Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard.
Remove the right speaker unit.
Step 4
- Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger.
- They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.
Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger.
They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.
Step 5
Battery
- Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.
- Gently pull the ribbon tape on the battery away from the bar. Repeat this process for the second ribbon tape.
Place your finger on the thin black bar at the end of the ribbon tape and flip each one up.
Gently pull the ribbon tape on the battery away from the bar. Repeat this process for the second ribbon tape.
Step 6
- Remove the six 3mm screws around the battery with the Phillips PH000 screwdriver.
Remove the six 3mm screws around the battery with the Phillips PH000 screwdriver.
Step 7
- Lift up the battery from the bottom and situate the black nylon spudger underneath the battery.
- Use the black nylon spudger to disconnect the multi-colored wires from the rest of the device.
Lift up the battery from the bottom and situate the black nylon spudger underneath the battery.
Use the black nylon spudger to disconnect the multi-colored wires from the rest of the device.
Step 8
Motherboard
- Disconnect all cables on the motherboard.
- See our connector guide for help safely disconnecting various types of connectors.
Disconnect all cables on the motherboard.
See our connector guide for help safely disconnecting various types of connectors.
Step 9
- Use the black nylon spudger to gently lift the motherboard away from the frame.
- Remove the motherboard.
Use the black nylon spudger to gently lift the motherboard away from the frame.
Remove the motherboard.
Step 10
Rear Camera
- Disconnect the camera piece from the motherboard.
- The camera piece is shaped like an “L”.
Disconnect the camera piece from the motherboard.
The camera piece is shaped like an “L”.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Joseph Rasico
Member since: 02/20/2017
2,160 Reputation
6 Guides authored
Badges:
11
+8 more badges
Team
USF Tampa, Team S1-G6, Leahy Spring 2017
Member of USF Tampa, Team S1-G6, Leahy Spring 2017
USFT-LEAHY-S17S1G6
3 Members
6 Guides authored
