Samsung Galaxy Note 10 1 3 5 Mm Headphone Jack Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          20 minutes

Sections

3.5 mm Headphone Jack
3 steps

Flags

BackSamsung Galaxy Note 10.1 2012
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              3.5 mm Headphone Jack

This is the back of the device and where you will begin to take it apart.
It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.
Use a metal spudger to pop up the corner of the silver piece.
Use the plastic opening tools to pry along the edges of the silver piece.
Lift up the silver piece to reveal the rest of the back cover.

This is the back of the device and where you will begin to take it apart.

It is necessary to remove the silver piece covering the camera first before removing the bigger back piece.

Use a metal spudger to pop up the corner of the silver piece.

Use the plastic opening tools to pry along the edges of the silver piece.

Lift up the silver piece to reveal the rest of the back cover.

1024

Step 2

Remove the three 5mm screws indicated by the red circles with the Phillips #00 screwdriver.
Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.
Remove the back cover.
At this point use anti-static gloves or do NOT take it apart on carpet.

Remove the three 5mm screws indicated by the red circles with the Phillips #00 screwdriver.

Using the plastic opening tools pry along the bottom of the device, moving to the sides of the cover to the top.

Remove the back cover.

At this point use anti-static gloves or do NOT take it apart on carpet.

Step 3

Remove the three 2 mm screws indicated by the red circles with the Phillips #00 screwdriver.
Starting with the black motherboard connector, remove the module indicated by the orange box in the second picture.
Replace the 3.5 mm auxiliary port with a similar model.

Remove the three 2 mm screws indicated by the red circles with the Phillips #00 screwdriver.

Starting with the black motherboard connector, remove the module indicated by the orange box in the second picture.

Replace the 3.5 mm auxiliary port with a similar model.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors

                    Gavin Tipker

Member since: 11/01/2018

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       IUPUI, Team S3-G1, Harley Fall 2018                        

                                                  Member of IUPUI, Team S3-G1, Harley Fall 2018 



                    IUPUI-HARLEY-F18S3G1                     


                                            3 Members                     


                                            2 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team